EFT immunity tester EFT61000-4 is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. They have fine performance, such as high stability, high reliability, easy to use etc, and meet the standard requirement of IEC 61000-4-4, EN 61000-4-4, GB/T17215.301, GB/T17215.322 and GB/T17626.4. EFT61000-4 has LCD display in both English and Chinese.
|Pulse frequency||1kHz~1000kHz (Adjustable)|
|Polarity||Positive, Negative or Positive/Negative automatic|
|Source impedance||50Ω±20% and 1000Ω±20%|
|Rise time of a pulse||5ns±30%|
|Pulse width at 50Ω||50ns±30%|
|Pulse width at 1kΩ||35ns～150ns|
|Testing functions||Set test mode freely or IEC Level|
|Coupling/Decoupling Network||Built-in 20A with 3phases/5wires|
|Working Power||AC220V(Option 110V)±10%, 50/60Hz|
Products of this category:
ESD61000-2: ESD Simulator (electrostatic gun) is in full compliance with IEC61000-4-2, EN61000-4-2 and GB/T17626.2 standards.
KH3961: EMC testing is a science subject which studies how electric appliance or system can work together without causing performance disability within limited space, limited time, limited frequency spectrum resource. This EMI testing system measures PD,QP and AV range from: 20dBμV-130dBμV(9kHz-150kHz);10dBμV-90dBμV (150kHz-30MHz).
KH3962: This EMI Receiver system measure range is from 9kHZ~300mHZ.
EFT61000-4: This EFT immunity measurement meets the standard requirement of IEC 61000-4-4, EN61000-4-4 and GB/T17626.4 (high voltage regulator is adopted, and displayed by LCD）.
SG61000-5: The performance of this surge generator meets the IEC61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
RWG61000-12 Ring Wave Generator is the test equipment in conformity to IEC standard IEC 61000-4-12 and ANSI-C62-41.
CSS61000-11: Voltage dip and interruption generator meets the standard requirements of IEC 61000-4-11, EN61000-4-11 and GB/T17626.11.
EMC200A／EMC200B: EMI Receiver equipped with this artificial network can test interference voltage of mains terminals.
CDN-M23: EMI Receiver equipped with this coupling decoupling network is equivalent to test radiated electromagnetic disturbance of electric lighting appliance with frequency from 30~300MHz.
AB-CLP: EMI Receiver equipped with this absorbing clamp can indirectly test radiated interference power of household electrical appliance, power tool and similar electrical appliance with frequency from 30~300MHz.
VOL-PBE: EMI Receiver equipped with this voltage probe can test disturbance voltage from load terminals or control terminals.