IS 16614 : Part 1 : 2018 Double-Capped LED Linear Lamps Part 1 Safety Specification

The standard IS 16614: Part 1: 2018 – Double-Capped LED Linear Lamps – Part 1: Safety Specification outlines the safety requirements for double-capped LED linear lamps intended for general lighting purposes. Here’s a summary of the key contents of the standard:

Scope
This standard specifies the safety requirements for double-capped LED linear lamps intended to replace fluorescent lamps with specific safety measures to ensure reliable and safe operation.

Key Safety Requirements
Electrical Safety: The lamps must comply with strict electrical safety standards, including insulation, protection against electric shock, and appropriate earthing measures to prevent electrical hazards.
Mechanical Safety: The lamps should be designed to withstand mechanical stresses, including impact, vibration, and torsion, without compromising safety or function.
Thermal Management: Proper heat dissipation mechanisms must be incorporated to prevent overheating, ensuring the safety of users and maintaining lamp performance over time.
Fire Resistance: The materials used in the construction of LED lamps should be flame retardant to reduce the risk of fire in case of malfunction.
Endurance and Lifetime Testing: The lamps are subjected to rigorous endurance tests to ensure long-term reliability and consistent performance. This includes testing under various environmental conditions such as temperature and humidity.
Photobiological Safety: The lamps must meet guidelines to ensure that emitted light does not pose a risk to human eyes or skin, complying with standards on blue light and UV exposure.
Markings and Instructions: Clear and permanent markings must be provided on the lamps, including details about voltage, wattage, manufacturer information, and safety warnings. User instructions should also be included to guide safe installation and operation.
Compatibility and Interchangeability: The standard ensures that these LED lamps are compatible with existing fittings meant for traditional fluorescent lamps, facilitating easy replacement without compromising safety.

Compliance Testing
• The standard requires a series of tests to verify compliance with safety specifications, including electrical, mechanical, and environmental testing protocols.
Packaging and Disposal
• Safety measures regarding packaging to prevent damage during transportation and instructions on the safe disposal of lamps to minimize environmental impact.
These requirements aim to enhance user safety, ensure reliable performance, and facilitate the safe usage of double-capped LED linear lamps in various applications.

LISUN supplies the fully test solutions for the following BIS IS 16614 (Part 1): 2018 , please see the below excel table:

BS IS 16614 Clause and Subject	LISUN Model
3.3,3.4,3.5 Electric parameter	LS2050B
3.6 Cap temperature rise	TMP-L
5.3.2 Table 2 Hazard related risk group labeling of lamp	EN 62471-C
6.3.5 Dimension A at Maximum Ambient Temperature	GDJS-015B
6.4 Temperature
7. Pin-Safety during Insertion	WB2681A
8.3 Insulation Resistance
8.4 Electric strength figure 1	SMT-PB
9.3 Torque test after heat treatment	CH338
11. Resistance to heat (figure 12)	ZBP-T and GW-225
12. Resistance to flame  and ignition	ZRS-3H
13.7 Safety of the lamp with different type of controlgear	GNG-E27
15.Lmaps with protection against  dust and moisture	SC-015
15.3 Tests of IP Rating	JL-X

Tags：CH338 , EN62471-C , GDJS-015B , GNG-E27 , GW-225 , JL-X , SC-015 , SMT-PB , TMP-L , WB2681A , ZBP-T , ZRS-3H