The standard IS 16614: Part 1: 2018 – Double-Capped LED Linear Lamps – Part 1: Safety Specification outlines the safety requirements for double-capped LED linear lamps intended for general lighting purposes.
IS 16614 : Part 1 : 2018 Double-Capped LED Linear Lamps Part 1 Safety Specification
LISUN supplies the fully test solutions for the following BIS IS 16614 (Part 1): 2018 , please see the below excel table:
| BS IS 16614 Clause and Subject | LISUN Model |
| 3.3, 3.4, 3.5 Electric parameter | LS2050B |
| 3.6 Cap temperature rise | TMP-L |
| 5.3.2 Table 2 Hazard related risk group labeling of lamp | EN 62471-C |
| 6.3.5 Dimension A at Maximum Ambient Temperature | GDJS-015B |
| 6.4 Temperature | |
| 7. Pin-Safety during Insertion | WB2681A |
| 8.3 Insulation Resistance | |
| 8.4 Electric strength figure 1 | SMT-PB |
| 9.3 Torque test after heat treatment | CH338 |
| 11. Resistance to heat (figure 12) | ZBP-T and GW-225 |
| 12. Resistance to flame and ignition | ZRS-3H |
| 13.7 Safety of the lamp with different type of controlgear | GNG-E27 |
| 15.Lmaps with protection against dust and moisture | SC-015 |
| 15.3 Tests of IP Rating | JL-X |
Your email address will not be published. Required fields are marked *
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
