LM-79 Moving Detector Goniophotometer (Mirror Type C)
LSG-6000
High Precision Rotation Luminaire Goniophotometer
LSG-1890B
High Precision Rotation Luminaire Goniospectroradiometer
LSG-1890BCCD
Goniophotometer for Automotive and Signal Lamps
LSG-1950
Goniophotometer for Traffic Signal Lamps
LSG-1950S
Compact Goniophotometer
LSG-1200A
Near Field Moving Detector Goniophotometer
LSG-1900B
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
Select an organization
to browse standards
IEC 60810:2022 is an international standard released by the International Electrotechnical Commission (IEC) on April 1, 2022. This standard is applicable to filament lamps, discharge lamps, LED light sources, and LED packages used in road vehicles, including headlamps, fog lamps, signal lamps, and interior lighting. It specifies the requirements and test methods for measuring performance characteristics such as lamp life, luminous flux maintenance, torsion strength, glass bulb strength, and resistance to vibration and shock. In addition, it provides information on temperature limits, maximum lamp outlines, and maximum tolerable voltage surges as a guide for lighting and electrical equipment design.
The performance requirements of IEC 60810:2022 are additional to the basic requirements specified in IEC 60809, and they are not intended for legal type-approval purposes by authorities. This standard plays an important role in ensuring the reliability and safety of road vehicle lighting equipment, helping manufacturers improve product quality and meet market requirements.
LISUN supplies the fully test solutions for the following IEC 60810:2022, please see the below excel table:
| IEC 60810:2017 Clause and Subject | LISUN Model |
| 3.1-3.6 and Annex A.5&Annex D&I Luminous Flux Maintenance | LEDLM-84PL |
| 4.2 Torsion Strength | CH338 |
| 4.4 Lamps Life Test | SY2036 |
| 4.6 and Annex B Resistance to Vibration | LVD-100KG |
| 7 Test Conditions for LED Light Sources | LPCE-2 |
| 7.6 Powered Thermal Cycling Test | GDJS-015B |
| 8.6.19 DEW Test | |
| 7.12-7.13 Transient Voltage Test | SUG335 |
| 7.14 Electrostatic Discharge Test (ESD) | ESD61000-2 |
| 8.6.3 High Temperature Operating Life(HTOL) Test | GW-500 |
| 8.6.7-8.6.8 Electrostatic discharge,(ESD-HBM)&(ESD-MM) Test | ESD-883D |
| 8.6.16 Thermal Shock (TMSK) Test | HLST-500D |
| 8.6.20 Gas Corrosion Test | SQ-010 |
There are some standards focus on specifying technical requirements and test methods for different categories of lampholders in the lighting field, ensuring their safety, compatibility, and...
LISUN’s Motor-Operated Tool | Power Tool Testing solutions strictly comply with a range of core international standards, providing full support for safety and electromagnetic compatibility (EMC)...
LISUN’s electric toy testing solutions cover IEC 62115, EN 71-1, ASTM F963 standards. Including electrical, mechanical, flammability tests to ensure toy safety compliance globally.
LISUN’s transformer test solutions meet IEC 61558-1, IEC 60076-1, IEC 62041 standards. Covering safety, performance, EMC tests, ensuring transformers comply with global requirements.
LISUN’s energy meter testing solutions align with IEC 62052-11, IEC 62053 series standards. Covering safety, electrical, environmental, and EMC tests, we help manufacturers meet global compliance...
LISUN’s audio-video communication testing solutions meet CISPR 13, IEC 60065, FCC Part 15 & EN 55032. Cover EMC, safety & performance tests for reliable AV equipment...
LISUN’s household and appliance switch testing solutions meet IEC 60669, IEC 61058, IEC 62271 standards. Covering electrical, mechanical & EMC tests for global compliance.
LISUN’s automotive electronics test solutions cover photometric/colorimetric testing, EMC immunity tests, IP waterproof/dustproof tests, and environmental simulation, meeting ISO, SAE, ECE standards.
LISUN’s cable and wire test solutions meet IEC 60245-1, IEC 60227-1, IEC 60502-1 and IEC 60189 standards, covering electrical, mechanical, and safety tests for global compliance.
LISUN has all equipment according to the IEC60669 measurement, including environmental chamber, IP code waterproof dustproof test, switch lift test, etc.
LISUN provide full test solutions for HID lamp, including integrating sphere system, goniophotometer system, EMI EMC chamber, HID ballast tester, electrical safety test, etc.
Lisun can supply full test solutions for fluorescent lamp, including integrating sphere system, goniophotometer system, EMI EMC test, electronic ballast tester, electrical safety test, etc.
For the CFL design and manufactory, LISUN can supply a full quality control test solution, including photometric, colorimetric, electricity, flicker, IES candela distribution, surge test, electrical...
LISUN’s LED driver test solutions cover lab testing, online testing, EMC/EMI tests, and safety checks, meeting IEC 60335, UL 60335 standards for reliable performance evaluation.
LISUN’s LM-79 and LM-80 test solutions cover LED photometric, colorimetric, and lumen maintenance tests, meeting IES standards for accurate performance evaluation.
LISUN’s mobile and network test solutions include EMC/EMI testing, color glossiness measurement, IP waterproof/dustproof tests, IK impact tests, and environmental simulation, meeting international standards.
LISUN’s indoor and outdoor LED test solutions meet IEC 60598-1, IEC 62722-2-1, CIE 121 standards, covering safety, photometry, and environmental tests for global compliance.
Abstract: Electrostatic discharge (ESD) is a typical electromagnetic interference source that causes crash, reset, data abnormality and even hardware damage of electrical and electronic equipment. esd...
Abstract As core equipment for verifying the environmental adaptability and reliability of industrial products, the temperature and humidity environmental chamber can accurately reproduce the dynamic changes...
Abstract Electrostatic discharge (ESD) is a critical interference source affecting the electromagnetic compatibility of electrical and electronic equipment. The operational stability of equipment under electrostatic interference...
Abstract In the R&D and quality inspection of products in LED lighting, electrical and electronic, and electronic component industries, environmental adaptability and reliability verification are core...
In 2026, the Bureau of Indian Standards (BIS) completed and issued the revised standard IS 16102-2:2026 for the operational performance of outdoor LED lighting equipment. As...
On February 24, 2026, the Bureau of Indian Standards (BIS) officially released the revised safety standard for self-ballasted LED lamps for general lighting, IS 16102-1:2026, which...
Abstract: Thermal chamber is a core instrument for verifying the environmental adaptability and reliability of industrial products, and plays a critical role in R&D and quality...
Abstract: As the core functional unit of the high and low temperature humidity alternating test chamber, the temperature humidity controlled chamber is the key to achieving...
Vibration test systems are core equipment in the research and development and quality inspection of industrial products. By simulating vibration states under different environments based on...
Temperature and humidity are core environmental factors affecting the performance stability and structural reliability of industrial products. LED lamps, electronic components and various industrial materials have...
Abstract Electrostatic discharge (ESD) is a common electromagnetic interference source during the production, transportation, and operation of electrical and electronic equipment, which may easily cause performance...
Abstract In the process of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are key factors...
Abstract In the system of industrial product R&D, production quality inspection, and compliance certification, the environmental adaptability and reliability of materials and products are core indicators...
Humidity chamber is not a generic laboratory enclosure but it is a precision system that has a direct effect on the validity of reliability stability and...
The thermal test chamber is a fundamental tool of accelerated aging and analysis of the heat stress due to the fact that the heat is among...
The climate test chamber is used to simulate controlled climatic conditions such as temperature and humidity that the product undergoes during storage transportation and operation. Climate...
The use of high temperature test equipment is critical in whether materials would be able to survive and perform reliably under high thermal stress. Heat resistance...
A mini temperature chamber has proved to be a necessity in laboratories requiring accurate thermal regulation and is less costly in footprint and at the same...
A humidity test chamber is one of the foundations of stability testing in which moisture-induced degradation is a believable risk. Water vapor undergoes interactions on its...
Environmental test program qualifies electronic components as a basic condition that they should be able to work under various operating and storing conditions. Electronics in modern...
A climatic chamber is a major equipment in checking whether components are viable and can perform well in the case of combined temperature and humidity pressure....
Environmental chamber lacks being just hot or cold. Qualification of current products involves concomitancy and simultaneous regulation of airflow temperature and humidity plus in certain cases...
Any laboratory, which provides credible characterization of LED products, is dependent on lighting test equipment. The first question when you are designing a LED testing program...
Abstract Electrostatic discharge (ESD) is a common electromagnetic interference source during the operation of electrical and electronic equipment, which may easily cause abnormal performance, functional failure,...
A thermal chamber is a key laboratory equipment that is utilized to analyze the product behavior under temperature stress. Diminished time, duration of thermal exposure In...
Proper light output is needed to measure and validate the output of the LED and to guarantee that the performance of the LEDs in the field...
Knowledge of the behavior of materials to repetitive temperature variations is vital in the design of durable products used in electronics, automobile, aerospace, and manufacturing industries....
The correct light output measurement is essential to determine the actual output of the current lighting products. An Integrating sphere is a dedicated device specialized to...
Innovative products are supposed to perform in various weather conditions under extreme temperatures and humidity, high or low rates of climatic changes, as well as being...
Since the development of LED technology, recent lighting fixtures are generating a high level of luminous intensity, which in most cases are tens or even hundreds...
In real-life situations, the products are hardly subjected to constant temperatures. Rather, they are subject to unremitting fluctuation as caused by climate, operating load, and nearby...
Electrostatic discharge happens to be one of the most frequently acquired but poorly understood threats to the electronic equipment. The ESD test is conducted as per...
Industrial luminaires with high power output would provide high quality and reliable luminance in harsh conditions like factories, warehouses, airports, tunnels and outdoor infrastructure. To determine...
The conditions in the modern automotive and aerospace systems are so harsh that they subject materials, electronic and mechanical assemblies to the supreme strain. Temperature variations,...
Electrostatic discharge is also one of the most hazardous and destructive dangers to present-day electronic circuits. With the shrinkage, quicker, more complexified devices, even the slightest...
Thermal stress analysis is an important tool in establishing the behavior of materials, electronics, and mechanical assemblies at excessive temperatures. The temperature test chamber will be...
One of the most unpredictable failures in the modern electronics is the electrostatic discharge. The smaller, faster and denser the device, the lower the components capability...
The contemporary product production needs testing in the real environment, rather than laboratory testing on its own, when controlled. Materials, electronics, mechanical structures, and coatings as...
The validation of electrostatic discharge has now become a compulsory step to most of the electronic products, industry assemblies, smart appliances, battery run modules as well...
Environmental testing is essential in engineering industries including the automotive, defence, electronics manufacturing, industrial equipment and medical equipment and aerospace industries as it assures durability and...
One of the most common tools of immunity testing is an ESD generator, which is necessary to test the achievable robustness of electronic products related to...
With the ever-increasing integration of electronics, composite materials and precision mechanical systems in modern products, there is an increased concern regarding reliability of these modern products...
One of the most frequently occurring reasons of failure in contemporary electronic systems is Electrostatic discharge and to effectively provide tests, proper calibration of an ESD...
The reliability and stability of the modern materials, electronics, and other consumer products is tested on the controlled environment in which temperature and humidity can be...
Lighting products are more complicated than ever due to the fast-growing use of LED lighting, intelligent luminaires, and sophisticated control systems. Such systems contain microcontrollers, drivers,...
Abstract Driven by digital and intelligent technologies, electrical and electronic equipment is developing rapidly towards high integration and low power consumption, and its sensitivity to electrostatic...
Abstract This paper focuses on the LISUN GDJS-015B Temperature and Humidity Control Cabinet, systematically expounding its technical principles, core performance parameters and industrial application value. As...
Abstract In the links of product R&D, production, and quality control, environmental reliability testing is a key means to verify the performance stability of products under...
Abstract Against the backdrop of the rapid development of the semiconductor industry, the problem of damage to semiconductor devices caused by electrostatic discharge (ESD) has become...
Abstract In the fields of material research and development and product quality testing, the impact of climatic environments on performance is crucial. As a core testing...
Abstract Electrostatic discharge (ESD) poses a significant threat to the reliability and performance of semiconductor devices, such as integrated circuits (ICs), light-emitting diode (LED) chips, and...
Abstract Electrostatic discharge (ESD) generated by human bodies or between objects poses significant risks to electrical and electronic equipment, potentially causing malfunctions or permanent damage. To...
Abstract Humidity and temperature chamber, also known as environmental test chamber or thermal chamber, is a critical equipment designed to simulate various climatic conditions for evaluating...
Abstract This article focuses on the lumen maintenance test method for LED products, aiming to provide a detailed introduction to the testing principles, procedures, and practical...
Introduction Heating chambers, also known as environmental test chambers, are critical tools in reliability testing, widely employed to simulate extreme climatic conditions such as high temperature,...
Introduction In today’s world, where electronic products are ubiquitous, the impact of electrostatic discharge (ESD) on device performance and reliability cannot be overlooked. ESD simulator guns...
Introduction Environmental chambers are sophisticated testing instruments designed to replicate extreme environmental conditions such as high temperatures, low temperatures, humidity, salt spray, and vibrations. These...
Introduction Low temperature testing is a cornerstone of environmental reliability testing, playing a pivotal role in industries such as electronics, automotive, aerospace, and materials science. This...
Introduction Electrostatic Discharge (ESD) is a phenomenon that occurs when two objects with different electrostatic potentials come into contact, causing a rapid transfer of electric charge....
Introduction In modern industrial production and scientific research, high-low temperature and humidity alternating test chambers are critical environmental testing devices widely used in industries such as...
Abstract Lighting technology has undergone a dramatic transformation in recent years, driven by advancements in LED systems and an increasing focus on energy efficiency. As lighting...
Introduction In modern industry and scientific research, environmental simulation equipment plays a crucial role. These devices can precisely control key parameters such as temperature and humidity,...
Introduction With the rapid development of electronic technology and manufacturing, the impact of static electricity on production processes has become increasingly significant. Especially in industries requiring...
Abstract The Sulfur Dioxide Environment Test Chamber is a specialized corrosion test apparatus designed to simulate the effects of sulfur dioxide (SO2) exposure under controlled environmental...
Abstract Vibration testing is a crucial element in validating the reliability, structural integrity, and durability of components and finished products throughout their operational lifespan. This paper...
Abstract: Sulfur dioxide (SO2) corrosion is one of the significant environmental factors affecting materials, especially in industries such as construction, electronics, and aerospace. To effectively evaluate...
Abstract Electrostatic discharge (ESD) can cause significant disruptions and damage to electronic equipment, making it essential to assess and fortify devices against such events. Electrostatic discharge...
Abstract Temperature and humidity chambers play a critical role in evaluating the durability and performance of various materials and electronic components under different climatic conditions. This...
Introduction In the field of environmental testing, the thermal cycle test chamber plays a crucial role in ensuring the reliability of materials, components, and products under...
Abstract Electrostatic discharge (ESD) is one of the most common sources of electrical interference in modern electronic devices. To ensure product reliability and compliance with industry...
The demand for reliable and energy-efficient LED lighting products has surged in recent years, emphasizing the importance of rigorous testing standards. The LED Lumen Maintenance and...
Abstract Electrostatic Discharge (ESD) is a critical concern for the reliability and durability of electrical and electronic equipment. The ESD testing gun is an essential tool...
Introduction Temperature and humidity testing plays a crucial role in assessing the durability and reliability of products in extreme environmental conditions. The LISUN GDJS-015B Temperature Humidity...
Abstract: Electrostatic discharge (ESD) is a leading cause of failure in semiconductor devices and integrated circuits (ICs). In the semiconductor industry, testing for ESD vulnerability is...
The vibration test machine plays a crucial role in the fields of product development, quality control, and environmental testing. Among the leading technologies in this area...
Introduction The climate test chamber is an advanced tool designed to simulate various climatic conditions, such as heat resistance, cold endurance, dryness resistance, and humidity tolerance....
Introduction In industries ranging from automotive to aerospace and electronics, the ability of components and finished products to withstand vibrations is a critical factor for ensuring...
Introduction The sulfur dioxide corrosion chamber is a critical piece of equipment in the environmental testing domain. It assesses the resistance of materials and their protective...
Introduction In today’s increasingly demanding industrial landscape, testing the durability and performance of products under various climatic conditions is critical to ensuring product reliability and long-term...
Abstract This paper discusses the evaluation of materials and their protective layers’ resistance to sulfur dioxide (SO2) corrosion using the SO2 Corrosion Test Chamber, specifically the...
Abstract Electrostatic Discharge (ESD) poses a significant threat to sensitive electrical and electronic equipment, as unexpected discharges can lead to malfunction or irreversible damage. Electrostatic discharge...
Introduction The importance of environmental testing has grown exponentially as industries seek to ensure the durability and reliability of their products. One of the most commonly...
Introduction Electrostatic discharge (ESD) is a critical factor in the design and testing of electronic equipment. The ESD test gun, a vital tool in the field...
Introduction Electrostatic discharge (ESD) is a critical factor affecting the performance and reliability of electrical and electronic devices. To ensure that devices can withstand ESD events,...
Abstract Electrostatic discharge (ESD) is a critical concern in semiconductor device manufacturing and testing, as it can cause significant damage to integrated circuits (ICs). Among the...
Introduction When testing the luminous flux and other photometric properties of LED lighting, integrating spheres are essential tools for accurate measurements. These measurements, often referred to...
Introduction Electrostatic discharge (ESD) is a critical concern in modern electronics and industrial equipment. ESD testing ensures that products are resilient to electrostatic interference, which can...
This paper explores the role of electrodynamic shaker, particularly focusing on the LISUN LVD-100KG Electrodynamic Vibration Generator System. Electrodynamic shakers are widely used in various industries...
Abstract This article explores the use of humidity test chambers to evaluate product performance under varying climatic conditions. Emphasizing the importance of meeting industry standards, such...
The High and Low Temperature Humidity Chamber is an essential tool used in various industries to simulate environmental conditions, including temperature fluctuations and humidity levels. This...
Environmental testing is critical in understanding how various products respond to changing climatic conditions. This paper discusses the role of thermal shock chamber, specifically the LISUN...
Abstract Electrostatic Discharge (ESD) is a significant threat to the reliability of electronic and electrical devices. The electrostatic discharge tester, particularly the LISUN ESD61000-2 ESD Simulator...
Abstract Humidity chambers, particularly the LISUN GDJS-015B Temperature Humidity Chamber, play a crucial role in simulating and testing the resilience of various materials and components to...
Electrostatic Discharge (ESD) Immunity Testing Electrostatic discharge (ESD) immunity testing is a crucial aspect of electromagnetic compatibility testing. The national standard for ESD immunity testing is...
As a key component in the automotive power system, the performance of the drive solenoid valve directly affects the power output, fuel efficiency, and overall operational...
In today’s automotive manufacturing industry, quality inspection is a critical step to ensure the quality and performance of products. As automotive technology advances and consumer demands...
An Electrostatic Discharge (ESD) generator is a testing device designed to simulate electrostatic discharge events. They play a crucial role in electronic device testing, aiding engineers...
An electrostatic discharge generator is a device used to simulate and test the tolerance of electronic devices and systems to electrostatic discharge (ESD) environments. By simulating...
Introduction: An integrating sphere, also known as a photometric sphere or luminous sphere, is a hollow spherical device used for optical measurements. Its design incorporates one...
The electrostatic discharge generator is a specialized device utilized to simulate and assess the resilience of electronic devices under electrostatic discharge (ESD) and similar electrostatically related...
Environmental testing refers to exposing products or materials to specific conditions, either natural or artificial, to evaluate their performance under realistic storage, transportation, and usage scenarios....
The high and low temperature test chamber is an essential device for conducting reliability tests on industrial products. It simulates high and low temperature environments to...
What is Electrostatic Discharge (ESD)? Electrostatic Discharge (ESD) is one of the common sources of interference in electronic devices. According to the national standard GB/T17626.2 (equivalent...
With the rapid development of modern industrial technology, the application of electroplated products is becoming increasingly widespread across various fields. However, the complex and diverse environmental...
The high and low temperature shock test chamber is the necessary testing equipment for metal, plastic, rubber, electronics and other material industries. It is used to...
High and Low Temperature Thermal Shock Chamber are used in electronic and electrical components, automation components, communication components, automotive parts, metals, chemical materials, plastics and other...
The High and Low Temperature Termal Shock Chamber is the main equipment of modern reliability laboratories, which simulates the changes in cold and hot environments for...
This article briefly explores the causes and consequences of ESD and EMI in mobile audio systems. It then discusses the use of ESD suppressors and EMI...
Does SO2 cause corrosion? The answer is yes. Sulfur dioxide (SO2) is a common and relatively simple sulfur oxide and one of the major air pollutants....
The high and low temperature thermal shock chamber has a large testing space and is a batch or electronic and electrical component for industrial manufacturers and...
Temperature Humidity Chamber introduction: Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
In industrial production, when testing electronic components, it is necessary to use a High and Low Temperature Thermal Shock Chamber for detection and testing. It is...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
Static Discharge Gun, is also known as ESD Simulation.With the continuous development of automotive electronic technology, the impact of electrostatic discharge on automotive electronic devices is...
The constant temperature humidity chamber will cause different levels of damage to the machine and equipment after long-term temperature running-in. Therefore, the following points are common...
Introduction: In a number of different sectors, the capacity to simulate harsh weather conditions in order to test the performance and durability of items is essential....
Introduction: Temperature control is a crucial component of the manufacturing process for pharmaceutical products. This component helps ensure the quality, safety, and efficacy of the final...
Introduction Environmental stress screening (ESS) is performed to determine the durability and dependability of electronic components and goods, and temperature and humidity chambers play a critical...
In normal applications, manufacturers of high and low temperature test chambershould pay attention to maintenance and upkeep after conducting experiments, which can increase the service life...
The high and low temperature humidity test chamber, also known as the temperature shock test chamber and the thermal cycle chamber, is a device used to...
In order to achieve reproducibility, temperature tests must be designed in such a way that the highest or lowest temperature reached at a certain point in...
When it comes to the performance and reliability of components and systems, the aerospace sector is among the most demanding and crucial. Aerospace equipment must undergo...
Introduction: Solar panels are essential for capturing solar energy, which has quickly become an important renewable energy source. The need of rigorously testing the performance of...
Today’s digital era relies heavily on data centers to house and handle massive volumes of data. Energy usage and heat control are two major issues that...
Introduction As the globe moves toward cleaner and more sustainable methods of electricity production, the renewable energy industry is seeing enormous development and innovation. The development...
Introduction Environmental chambers reliability testing relies heavily on temperature cycling. Temperature cycling is a method of testing a product’s or component’s resilience and performance in severe...
Introduction: The ability to control heat is essential in the creation of any electrical equipment. Effective heat dissipation solutions are crucial to maintain maximum performance, reliability,...
Introduction Humidity’s effect on material deterioration may be measured in environmental chambers. The purpose of humidity testing is to evaluate a product’s performance and durability in...
Introductio Electronics play a crucial role in modern society because of how pervasive technology has become. Every electronic gadget, from cellphones to car systems, is built...
Introduction: Despite the widespread belief that electrostatic discharge or ESD guns are exclusively useful for testing electronics, this is not the case. Electrostatic discharge (ESD) guns...
Introduction: Products need to be well-packaged so that they don’t get damaged or spoiled while being stored, transported, or distributed. It is crucial that items get...
Introduction Environmental elements such as temperature and humidity may have a major impact on how well and how long something lasts. The aerospace, automotive, construction, and...
Introduction Electronic components are often put through their paces in today’s fast-paced technological world, where they are exposed to a wide range of environmental conditions that...
Introduction It is of the utmost importance to ensure that the batteries in electric vehicles are both reliable and secure as the number of individuals who...
Introduction: Lighting systems, material analysis, and optical testing are just a few examples of the aerospace industry’s stringent requirements for accuracy and consistency. In order to...
Introduction The corrosive effects of salt spray on building materials in coastal areas may have a major influence on their longevity and function. Extensive testing is...
Introduction: High Precision Spectroradiometer Integrating Sphere Systems, also known as HPSISS, are helpful instruments that may be used for a variety of purposes, including determining the...
Introduction The powers of diagnosis, treatment, and monitoring have all been significantly improved because of technological advances in medicine. Before they can be utilized in a...
Introduction The food and beverage business works in an environment that is highly regulated, and the emphasis is always placed on the quality and safety of...
Introduction More and more research and development are going into improved insulation materials in an effort to make buildings more energy efficient and environmentally friendly. A...
When assessing the effectiveness of insulating materials, thermal conductivity is a key feature to take into account. Applications ranging from thermal insulation to electronics depend on...
Introduction Corrosion is a common problem that arises in many different industries because it shortens the lifespan of products, structures, and materials. Through meticulous testing and...
Introduction The performance, dependability, and longevity of automotive components and systems may be evaluated under severe temperature settings, making thermal chambers an essential tool for automotive...
Electrostatic discharge (ESD) is a quick (nanosecond) physical discharge of static electricity to electronic components and parts. This discharge should be considered as a type of...
Introduction Industries as diverse as electronics, automobiles, airplanes, and telecommunications all rely on rapid temperature change testing. It entails putting items and parts through rapid temperature...
The static electricity generated by the human body to an object or between two objects may cause the circuit of electrical and electronic equipment to malfunction...
Introduction To guarantee their safe and dependable performance under harsh environments, aircraft components and systems must undergo extensive testing and validation within the aerospace industry. Aerospace...
From October 27th to October 30th, 2023, LISUN participated in the world -renowned Hong Kong International Lighting Fair（Autumn Edition）. This exhibition is an important event in...
In addition to components such as compressors, pressure accumulators, condensers, and dryers, the refrigeration system of the high and low temperature test chamber also has several...
The High and Low Temperature Thermal Shock Chamber, is mainly used in the electronics and electrical components, automation components, communication components, automotive parts, metals, chemical materials,...
Introduction Automotive, aerospace, construction, and maritime sectors all face major corrosion challenges. Manufacturers use coatings and metals with high corrosion resistance to counteract corrosion’s destructive effects....
Introduction Humidity and temperature chambers are crucial for product testing and development in many fields. The performance, dependability, and longevity of items may be evaluated in...
Introduction Electronic device R&D and testing rely heavily on temperature and humidity chambers. Electronic devices must prove their dependability, performance, and durability across a wide range...
I. ES SO2 Cause Corrosion? The answer is yes. Sulfur dioxide (SO2) is a common and relatively simple sulfur oxide and one of the major air...
What are the standards for high and low temperature chamber? High and low temperature chamber are used to test various raw materials, such as electronics, electrical products,...
Introduction Testing and developing batteries, which are vital power sources in many sectors including automotive, electronics, renewable energy, and aerospace, need temperature and humidity chambers. Demand...
The High and Low Temperature Termal Shock Chamber is the main equipment of modern reliability laboratories, which simulates the changes in cold and hot environments for...
The two main functions of a high and low temperature chambers are refrigeration and heating. During the heating and cooling process, accurate, efficient, and uniform heating...
What is the Electric Discharge? This should be the main culprit that causes all electronic components or integrated circuit systems to cause excessive electrical stability damage....
Introduction Because they allow for precise and repeatable testing of components and systems under harsh climatic conditions, temperature and humidity chambers play an essential role in...
The High and Low Temperature Thermal Shock Chamber has the advantage of large experimental space inside, which is used for material exploration and industrial manufacturers’ batch...
The temperature and humidity of a high and low temperature test chamber exist in two situations: alternating test chamber and constant test chamber. The control method...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
Introduction Pharmaceutical research and development greatly benefits from the use of temperature and humidity chambers for the purpose of testing and evaluating medication products, formulations, and...
Electrostatic discharge (ESD) is a common phenomenon that occurs when two objects with different electrical potentials come into contact or are separated. The discharge can cause...
Introduction Medical device testing and validation rely heavily on temperature and humidity chambers. Safety, dependability, and efficacy of medical equipment are of paramount importance; hence the...
The electrostatic discharge generator is a device used to generate a high-intensity electrostatic field and induce electrostatic discharge phenomena. Electrostatic discharge is a process of charge...
Introduction To ensure the safety, quality, and shelf life of its goods, the food and beverage sector relies heavily on temperature humidity chambers for extensive testing....
Scope of application Suitable for performance reliability tests for industrial products. This Temperature Humidity Chamber has a large temperature control range, and its performance indicators meet...
Introduction The performance and longevity of packing materials may be evaluated with the use of temperature and humidity chambers, which are multipurpose testing tools. The quality...
With the rapid development of electronic products, how to ensure the strength of electronic components is not only valued by manufacturers and consumers, but also increasingly...
Programmable high low temperature chamber, also known as thermal test chamber, have been widely used in many industries to test the physical properties and endurance of...
High and low temperature chambers are a common testing equipment widely used in industries, research institutions, aerospace and other fields. By simulating extreme weather environments more...
The High and Low Temperature Thermal Shock Chamber is the main equipment in modern reliability laboratories, used for cold and hot cycling of various materials and...
Introduction: Electrostatic discharge (ESD) guns are high-tech instruments for performing electrostatic discharge (ESD) testing to determine the reliability and durability of electronic components and systems. Their...
When selecting high and low temperature humidity and heat test chamber, we should make rational selection according to our own needs, and at the same time,...
Introduction When conducting tests and experiments on materials, goods, and electronic components in a controlled environment, temperature and humidity chambers are indispensable instruments. Regular calibration of...
Introduction: When testing electronic components and systems for performance and reliability, electrostatic discharge (ESD) guns are necessary. While the ESD gun is the primary tool, there...
High temperature chamber is mainly used for high-temperature experiments in industrial and mining enterprises, laboratories, scientific research institutions, etc. It has the functions of drying and...
Temperature and Humidity Chamber is used to test the material structure and composite material, can withstand the range in the continuous environment of extreme low temperature or...
Introduction Electronic components are the backbone of contemporary technology, and many different fields depend on their dependability and efficiency. Electronic components are sensitive to temperature and...
Introduction: To measure the efficiency and durability of electronic parts and systems, electrostatic discharge (ESD) testing relies heavily on ESD guns. Understanding and following suitable calibration...
Vibration exciters used in vibration laboratories are vibration generators. When selecting vibration generators, suitable types should be selected according to the test frequency range. Electro-hydraulic vibration...
The constant temperature humidity chamber is composed of six systems: control, humidity, refrigeration, heating, air circulation, and sensors. The working principles of these systems are: 1....
Introduction Manufacturing, construction, aerospace, and automotive are just a few of the sectors that rely heavily on material testing. The capacity of materials to survive various...
Introduction: When evaluating electronic components for performance and reliability, electrostatic discharge (ESD) guns are necessary. Keeping your ESD gun in tip-top shape is essential for getting...
The static electricity generator is a generator for giving static electricity to objects. When used, it is required to be grounded to the ground, otherwise it...
I. Working Principle of Each Component of High and Low Temperature Constant Temperature Chamber The cooling system of high and low temperature test box is one...
The terms electromagnetic compatibility (EMC) and electromagnetic interference are often used interchangeably when talking about the testing of commercial electronic goods and products. Because the two...
In the production process of electronic devices, there is always a crucial step, and using a high and low temperature chamber to test product quality has...
Introduction To reach a sustainable and low-carbon future, renewable energy technologies like solar and wind power are essential. Thorough testing and assessment are required to guarantee...
Introduction: The use of electrostatic discharge or ESD guns has become standard practice for testing the reliability of electronic components and systems against ESD attacks. New...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real...
Why is the constant temperature humidity chamber blocked? 1. During the test, the door was opened, and there was icing in the working room. 2. The...
Introduction To make sure that textiles and clothing last and are comfortable to wear and functional, the fast-paced textile and apparel sector must use rigorous quality...
Because the high and low temperature chambers are used to test the relevant characteristics of goods, do not install them casually. If it is installed casually,...
The research and development of LED light source has become the focus of the world. Governments in various countries are constantly improving the standards of LED...
High and Low temperature humidity chamber plays an active role in the fields of aviation, automotive, home appliances, raw materials, components, scientific research, etc. It can...
In order to assess the electrostatic discharge (ESD) immunity of electronic devices and systems, GB/T17626.2-2006 is a newly released standard in China. The ESD test is...
Introduction: In electrostatic discharge (ESD) testing, electrostatic discharge (ESD) guns are used to determine how vulnerable electronic components and systems are to ESD. Protecting both people...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
The esd generator gun is an important equipment in electromagnetic compatibility measurement and testing for electrostatic discharge immunity testing. You have encountered static electricity energy in...
High and Low Temperature Thermal Shock Chamber is the main equipment of modern reliability laboratory, which is used for cold and hot cycles of various materials...
ESD generator ESD61000-2 is specially designed for the characteristics and requirements of electrostatic immunity test. Its performance meets the latest IEC (International Electrotechnical Commission) standard IEC61000-4-2,...
The high and low temperature chamber is also known as environmental test chamber is a common testing equipment that simulates extreme weather environments more realistically through...
Introduction Temperature and humidity chambers are an essential component in many companies’ efforts to reproduce and analyze the effects of temperature and humidity on a diverse...
The high temperature test chamber is also known as the environmental testing equipment, is used to put the product into the test chamber, set the high...
Integrating sphere is an optical measuring instrument, which can quantify the parameters of light source such as luminous flux, color temperature, light efficiency, etc. The integrating...
Introduction: When conducting ESD testing to determine the reliability of electronic components and systems, electrostatic discharge (ESD) guns are necessary. Regular ESD gun calibration is necessary...
Introduction Colorimetry and CRI measurements are very important in a wide variety of industries, including lighting, display technology, and the material sciences, amongst others. Integrating spheres...
Introduction: The reliability of electronic components and systems against ESD occurrences is largely determined by the results of ESD testing. During testing, electrostatic discharge (ESD) guns...
I.The principle of high and low temperature test chamber alternating wet and heat test box: Under high and low temperature test chamber, due to the steam...
Introduction Integrating spheres have shown their worth in several sectors by allowing for precise and trustworthy data collection during optical measurement and light characterisation. Significant advances...
I. Overview of Temperature and Humidity Measurement Method of High and Low Temperature Humidity Chamber： Electric and electronic products are almost used in various climatic conditions...
Introduction: Testing for electrostatic discharge (ESD) is essential for guaranteeing the quality and functionality of electronic parts. However, engineers face a number of obstacles while conducting...
Introduction When it comes to HVAC (Heating, Ventilation, and Air Conditioning) systems, temperature and humidity chambers are essential for development and testing. Manufacturers and researchers may...
High and low temperature chambers are a type of environmental test chamber and widely used in various tests. It contains many kinds of products and is...
Introduction The testing of new building materials often requires exposure to a range of temperatures and humidity levels. The performance, durability, and adaptability of building materials...
Introduction: Advances in ESD gun technology have been crucial in assuring the dependable functioning and safety of electronic equipment in an industry where electrostatic discharge (ESD)...
The Temperature Humidity Chamber is a kind of humidity testing equipment , used to test the range of material structure and composite materials that can be...
High and low temperature chambers are widely used in various industries such as electronics, electronics, aviation, chemical, military, etc. However, the testing requirements for products in...
ESD is the abbreviation of Electrostatic discharge, which stands for electrostatic discharge. It refers to a sudden electric current between two objects with different electric potentials....
Introduction In optical measurements, having results that are accurate and trustworthy is very necessary. Integrating spheres have been found to be helpful instruments because of their...
High Low Temperature Testing Test Chamber Intermittent Wet and Hot Test Box is a special sealed test box. The correct use of the device can not...
Introduction In the automobile sector, where the dependability and performance of cars and their components are of the highest significance, temperature humidity chambers play a key...
Introduction Electrostatic discharge (ESD) is a major threat to electronics, since it may cause malfunctions, lower dependability, and higher warranty costs. Electronic components must undergo rigorous...
Introduction Testing and developing electrical products is impossible without environmental chambers. Electronic equipment is tested in specialized chambers that can reproduce a wide range of environmental...
Introduction Integrating spheres have played an important role in optical measurements because of the uniform illumination they provide and their ability to precisely characterize light sources,...
Introduction As part of the effort to locate dependable sources of energy for the long term, novel approaches to energy production have been researched. Electrodynamic vibration...
Electrostatic discharge (ESD) is a common problem in the electronics industry. It occurs when two objects with different electrical potentials come into contact, causing a sudden...
The High and Low Temperature Termal Shock chamber, also known as the explosion-proof constant temperature and humidity test chamber, is a professional equipment used to test...
Introduction There is a considerable amount of unrealized potential in the form of vibrational energy that is produced by things like factories and automobiles and by...
Introduction Numerous scientific fields make use of the technique of spectrophotometry, which is the measurement of the absorption, transmission, and reflection of light. With its assistance,...
The application field of Temperature Humidity Chamber is very wide, so the established good market demand has great development space in the environmental test equipment industry....
Introduction: The need for reliable protection against electrostatic discharge (ESD) is growing as the pace of technological advancement continues to set new records. When electronic equipment...
Electrostatic discharge (ESD) is a major issue in electronics production. This is because electrical components might be damaged beyond repair by electrostatic discharge (ESD). Electrostatic discharges...
To simulate a range of environmental conditions, including those involving temperature and humidity, temperature humidity chambers are a subset of environmental chambers used for testing and...
Introduction The integrating sphere has lately become more popular for application in the area of optical and photometric measurements. The versatility and efficiency of these instruments...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
For now, there are more and more places where we use LED lights in our lives. LED is a light-emitting diode semiconductor device. Its working principle...
The High and Low Temperature Thermal Shock Chamber has two chambers and three chambers. The customer can choose which type according to the actual test requirements....
The test principle of the high and low temperature chamber has the tendency to simulate and simulate the temperature change in the natural environment. It is...
In addition to the selection and circuit design of components, good printing circuit board (PCB) design is also a very important factor in electromagnetic compatibility. The...
In industrial production, when testing electronic components, it is necessary to use a High and Low Temperature Thermal Shock Chamber for testing. It is used for...
The high and low temperature test chamber is suitable for environmental simulation reliability tests such as high and low temperature constant and gradual changes, damp heat...
Precautions when purchasing the high and low temperature test chamber: 1. Before understanding the high and low temperature chamber, we should first understand the needs of...
With the development of electronic technology, household electrical products are becoming increasingly popular and electronic, and the increasingly developed radio, television, post and telecommunications and computer...
1. Cleaning and maintenance inside and outside the Temperature Humidity Chamber ①. Before the high and low temperature test, the internal impurities must be removed. ②....
The High and Low Temperature Humidity Chamber is a kind of testing mechanical instrument used to test the extent of endurance of material structure and composite...
In fact, one of the factors affecting the test results of the high and low temperature chamber is the sealing of the equipment. It can be...
If the high and low temperature humidity chamber uses ordinary water humidification particles, it will be relatively large. The humidity sensors of the equipment are more...
The core component of the compressor in the refrigeration system is the core component of the high and low temperature chamber, which plays a decisive role...
When the high and low temperature chamber is in the low temperature state, different test materials will have different physical shrinkage phenomena, which may make the...
High and low temperature & humidity test chamber is a common test equipment that simulates the heat dissipation performance, stability performance, power consumption parameters, and estimated...
SY2036 LED aging and life test rack is fully designed according to the IEC standards, and it can also be designed based on the customer request....
Equipment, goods, and chemicals may be tested for their durability, stability, and use in a carefully managed and controlled environment called an environmental test chamber. Environmental...
The Temperature Humidity Chamber is the key instrument for testing the temperature and humidity natural environment. It is mainly to carry out high temperature, low temperature...
LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in...
In the context of modern technological development, electrostatic discharge technology has been widely applied. As an important equipment for electrostatic discharge experiments, electrostatic discharge generators can...
The use of environmental test chambers is very important for the accurate assessment of environmental stress cracking (ESC) in polymers. Environmental stress cracking, also known as...
Thermal testing is carried out in a thermal chamber, also known as an environmental test chamber. The testing is carried out using convection. The main purpose...
Environmental chambers are used to research the impacts of various environmental elements on multiple items or materials, including temperature, humidity, light, and others. Environmental chambers HLST-500D...
To ensure their goods can withstand even the most extreme circumstances, manufacturers often use a humidity chamber, a special device that simulates a variety of humid...
I、 Purpose of environmental test The environmental test examines the adaptability of the product to the environment, determines whether the environmental adaptability design of the product...
LEDLM-80PL LED Lumen Maintenance and Aging Life Test System is designed according to IES-LM-80 and TM-21, it used to test & record the optical and electrical Maintenance for single...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber, Environmental test chambers are according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber...
1. Countermeasures and rectification measures for common problems in ESD immunity testing 1.1 The mechanism of electrostatic discharge formation and its harm to electronic products Static...
It’s important to run testing on LED aging. Without an aging test, it is impossible to ensure the product’s quality, and unreliable elements will show up...
The Thermal Shock Chamber from LISUN is an efficient tool for subjecting products to thermal shock testing. A product carrier basket in Thermal Shock Environmental Chambers...
The terms “shaker table” and “vibration table” can refer to a variety of things in the field of vibration testing. Shaker tables are used for a...
As a type of reliability test equipment, environmental test has developed into a method to predict how the product use environment affects the performance and function....
A humidity chamber often referred to as a temperature and humidity chamber , is appropriate for testing products like electrical equipment, home appliances, food, trolleys, vulcanized...
How is ESD static electricity generated? Due to external effects such as friction or in the form of various energies such as kinetic energy, potential energy,...
ESD simulator An ESD simulator, often known as an ESD gun, is a portable device that is used to evaluate the resistance of devices to electrostatic...
The high and low temperature test chamber is a common test equipment for simulating the heat dissipation performance, stability performance, power consumption parameters and estimating the...
What is an Environmental Chamber? An Environmental Chamber, also known as a climate chamber or a climatic chamber, is an efficient method to test how sensor...
Environmental Chamber (GDJS-015B) LISUN’s climate testing chamber or environmental chamber is a sealed space where the temperature and humidity may be adjusted as needed. This device’s...
Why Is ESD Testing Important? Monitoring the efficiency of your tools is crucial while trying to maintain an Electrostatic Protected Area (EPA). The most recent ESD...
ESD testing, also known as electrostatic discharge testing, is crucial for many goods. The sudden exchange of electricity between electrically charged things is known as ESD....
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
Environmental test equipment is the general name of all test chambers simulating natural climate environment. Representative products include salt spray test chamber, high and low temperature...
In any high voltage and electrical noise system, ESD immunity is an important aspect of EMC and a key consideration in the selection of current isolation...
Environmental test chamber is a necessary equipment for enterprises engaged in the production of electronic products. It can test and test electronic products and is an...
Electrostatic Discharge Electrostatic Discharge (ESD) is defined by the IEC as “a transfer of electric charge between bodies of varying electrostatic potential in proximity or through...
IEC 61000-4-2 compliance test standard for electrostatic discharge immunity has voltage levels of 2,000 to 15,000 Volts. The electrostatic discharge simulators or “ESD Guns” produce voltage...
How Does Test Chambers Work? Different systems are used in test chambers to create and maintain the ambient conditions depending on their intended use. Since they...
The test to evaluate and analyze the reliability of electronic products is called reliability test Reliability test is an activity to evaluate the functional reliability of...
What is Climate Chamber? Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chamber or Thermal Chamber or Temperature Chamber....
An electrostatic discharge generator gun, or ESD stimulator gun , is an instrument widely used for ESD testing. Due to its portability and compact size, an...
High and Low Temperature Thermal Shock Chamber can be used in the temperature shock test and fast-changing temperature test in a wide range such as aviation,...
What is an Environmental Test Chamber? LISUN has been building the most recognizable environmental testing equipment in the industry. Every chamber sold is highly recommended in...
ESD is a science formed since the mid-20th century to study the generation and attenuation of static electricity, electrostatic discharge model, electrostatic discharge effect and electromagnetic...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. ESD61000-2_Electrostatic Discharge Simulator What is a ESD test? The...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test...
IEC (International Electrotechnical Commission) is the earliest international standardization organization in the world. It was established in 1906 to enhance international mutual understanding and hope that...
Integrating sphere measurement system is the most common light color measurement equipment in the lamp industry. Its measurement results can meet the R & D and...
Electricity discharge may cause electronic products such as mobile phones, electronic products remote control, smart locks, smart LED lighting systems, etc., or e -components, IC chips,...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of...
ESD simulatorguns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. In a dry environment, the human...
Introduction An Environmental Chamber GDJS-015B is a sealed room where environmental parameters like temperature and humidity can be adjusted. Some chambers are also known for delivering...
Environmental Chamber An Environmental Chamber is defined as an enclosed space where environmental conditions such as temperature and humidity can be controlled. Some chambers are also...
What are the Types of Temperature Chambers Temperature chambers come in a wide range of sizes, from those that fit on a shelf to those that...
What is ESD Testing? A crackling sweater hair that sticks straight out from your head, a small electric shock from a door handle. We are more...
The ESD test is used to determine the durability of electronic devices when electrostatic discharge occurs when a person touches them. These tests can be conducted...
What is an Environmental Chamber? An environmental chamber, also known as the climatic chamber or environmental test chamber, is an enclosed space for testing the effects...
What is the function of Environmental Chambers? Temperature, humidity, air pressure, light, and motion can affect the performance of a product. The environmental chamber can be...
What is a ball pressure test? Under the action of high temperature, the structural properties of non-metallic materials and insulating materials will change greatly, and this...
Introduction An environmental chamber, also known as a climate test chamber, is an enclosed area in which the temperature and humidity conditions can be modified as...
Technology is improving with growing demands. New equipment is introduced in the market to fulfil these changing needs. One such instrument is the Environmental Chamber. It...
ESD generator is made to test electrical and electronic equipment’s ability to tolerate ESD. Static charge generated by the human body to an object or between...
What is the LED test standard？ Semiconductor light-emitting diode (LED) is a new type of light-emitting body, with high electro-optical efficiency, small size, long life, low...
It is possible to test the reaction of goods when they are exposed to fluctuations in humidity by using a humidity chamber. This chamber is also...
Uncontrolled environmental conditions, such as temperature and humidity, may be achieved in an Environmental Chamber, which is an enclosed chamber. By delivering salt spray within the...
Hazards in industry: The generation of static electricity is inevitable in industrial production, and the hazards caused by it can be attributed to the following two...
In the field of environmental testing, and the environmental chamber is a device that enables users to manipulate the ambient conditions in an enclosed space to...
Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts...
The International Electrotechnical Commission (IEC) created the IEC 60068 standard, which is widely accepted throughout the world. Environmental testing for electronic equipment, components, and electromechanical products...
Climate chambers are enclosed spaces used to evaluate the impact of certain environmental conditions on biological things, industrial goods, materials, and electrical devices and components. Environmental...
The high and low temperature humidity environmental chamber is a test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc., used to test...
1. Differences in application areas ESD61000-2 Electrostatic discharge generator is fully compliant with IEC/EN 61000-4-2, GB/T 17626.2 standards and belongs to the category of electromagnetic compatibility....
The high and low temperature environmental test chamber is also called the high and low temperature cycle test, which is one of the product environmental reliability...
The high and low temperature environmental chamber is formed by CNC machine tools, the humidification system pipeline is separated from the control circuit board, and the...
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food,...
The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment circuits to malfunction or...
The ESD test generator is mainly used to simulate the static electricity on the human body. The main function is to generate a certain amount of...
Introduction: The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances,...
Temperature, humidity, and other environmental factors may be regulated in an Environmental Chamber. Corrosion may be simulated in certain chambers by spraying salt into the room....
An environmental chamber’s job is to find out how a product will perform in various climatic, physical, and other unusual circumstances. When a product is being...
Expert equipment for environmental testing, semi-conductive testing, chemical stability tests, and more is a temperature test chamber. The size of an environmental chamber temperature test chamber...
The walk-in environmental chamber is intended to determine the characteristics of your goods to deal with external conditions such as heat, cold, dryness, moisture, etc. The...
How to do ESD test? Here are a few simple steps: 1. Air discharge/contact discharge a) First turn on the switch power b) Then enter the...
Environmental chamber is the general name of all test chambers that simulate natural climate environment. The representative products include salt spray test chamber, high and low...
ESD tables are excellent if you restrict and regulate the quantity of electricity in a certain region. ESD means electrostatic discharge and is the consequence of...
The high and low temperature humidity chamber, as its name implies is the experimental equipment that performs high and low temperatures on the product. The production...
The ESD simulator gun is mainly used to simulate the static electricity on the human body. The main function is to generate a certain amount of...
IEC 60068-2-6 <Environmental testing –Part 2-6: Tests – Test Fc: Vibration (sinusoidal)> consists basically of subjecting a specimen to sinusoidal vibration over a given frequency range...
Many customers have purchased LISUN GDJS Walk-in environmental chamber , but they will not use them frequently after purchase. It often needs to be idle for...
On 5th, December, 2019, the European Commission officially announced the new ErP Regulation (EU) 2019/2020 and Energy Efficiency Labelling Regulation (EU) 2019/2015 for lighting products, which will...
High and low temperature and humidity controlled chambers GDJS Series is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
The environmental conditions test standard for automotive exterior lighting and optical signal devices is ISO16750 <Road vehicles-Environmental conditions and testing for electrical and electronic equipment>, IEC60068-2,...
LED lamp aging test standards: Generally speaking, as a green energy-saving LED lamp, if the performance test is reduced before use, there will be a certain...
Introduction for the High and Low temperature humidity Chamber: High and Low temperature humidity Chamber adopts imported special man-machine interface temperature and humidity controller, which is...
Electrical and radio-frequency disturbances occur during normal operation of many items of motor vehicle equipment. They are generated over a wide frequency range and can be...
Forehead thermometers is both medical product and electronic product. It only needs one or two seconds to complete a body temperature measurement, which is very suitable...
The full name of IEC 60068-2-1 is Environmental Testing Part 2-1: Tests-Test A: Cold. It is edited by the IEC technical committee in 2008.We will introduce...
Fair: HKTDC Hong Kong International Lighting Fair 2019 (Autumn Edition) Date: 2019/10/27-2019/10/30 City: Hong Kong Exhibition Hall: Hong Kong Convention and Exhibition Centre Organizers: Hong Kong...
Electromagnetic Compatibility EMC refers to the ability of a device or system to function properly in its electromagnetic environment and does not constitute an electromagnetic disturbance...
Recently Saudi Arabia released new LED standard SASO 2902 for energy efficiency, functionality and labeling requirements for Lighting products. We have got the SASO 2902 in 2017 which is draft...
LISUN GDJS seriesHigh and Low Constant temperature and humidity chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2). It is used to test the CFL/LED which...
LISUN engineer went to Egypt in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LISUN engineer went to Iran in December 2018 to provide on-site installation & training services for customers there. And held Lighting Testing Technology Salon on 25th...
LISUN engineer went to Saudi in December 2018 to provide on-site installation & training services for customers there. During the period, we held a lighting testing...
LED package is mainly to provide a platform for LED chips, so that LED chips have better performance of light, electricity and heat. Good packaging can...
In general, LED can be used for more than 50000 hours, and some manufacturers are promoting their LED to operate for about 100000 hours. The main...
In China, cars are becoming more and more popular. With the development of automobile industry, automotive lights are also developing. Automobile lights have experienced Incandescent Light,...
On January 31, 2018, Lighting Poland 2018 arrived on schedule. LISUN has already prepared well for this exhibition. Our booth address is Hall 4 Booth C25...
The Hong Kong International Lighting Fair has become the largest industry exhibition in Asia, and the second largest in the world. LISUN participates this exhibition every...
HKTDC Hong Kong International Lighting Fair (Autumn Edition) 2017, organized by the Hong Kong Trade Development Council at the Hong Kong Convention and Exhibition Centre (HKCEC)...
Istanbul Light is an international platform, where all the players in the lighting industry come together under a same roof and where the latest technologies and...
In September and October 2013, Chairman Xi put forward a major initiative of building “The Silk Road Economic Belt” and “The 21st Century Maritime Silk Road” (referred to...
The International Electrotechnical Commission (IEC) has issued IEC 61000-4-2 Ed. 2.0 (2008-12) entitled “Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge...
High Low temperature and humidity test chamber is used to simulate a actual temperature and humidity environment which it may caused any influence for surrounding objects....
With the widespread use of electrical and electronic equipment, the problem of electromagnetic disturbance has also brought electromagnetic pollution. EMC(Electro Magnetic Compatibility) refers to the ability...
In natural environment, temperature and humidity are two indivisible natural factors. Due to different geographical locations in different regions, the temperature and humidity effects generated are...
Electrostatic discharge may occur from personnel to object or object to object, and it will cause the failure of electric and electronic devices. So, the test...
LEDs and LED luminaires with high light efficiency, longer lifetime, better energy saving and environmental friendly advantages to achieve top position on the lighting industry, like...
In recent years, many manufacturers are planning to manufacture common global LED drive products with a wide voltage input. But since different countries have different product...
During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental...
Spectroradiometer & Integrating Sphere System as main test device to measuring LED lamps, it’s as a most important device to judge the quality of lighting products....
LVD’s goal is to ensure the safety usage of low-voltage equipment. Its range of application is on electrical products with voltage at 50V to 1000V AC...
LED street lights become more and more popular in recent years, but a few days ago, the American Medical Association (AMA) just issued an official statement,...
India lighting market develops rapidly, research reports point that LED lighting market scale will reach 1.14 billion dollars, growth 47.1%. India government intends to make India...
With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards...
IESNA-LM-80 (Measuring Lumen Maintenance of LED Light sources) is an approved method by Lighting Engineering Association of North America (IESNA) for the third generation SSL products;...
It is quite important for factories and users to prevent equipment from electrostatic discharge. With the wide application of microelectronic components, to improve the reliability of...
LED has the features of long life, but with the different working condition and drive current, its life will be different, but generally the life will...
At the end of October 2016, Lisun attended lighting fair in as in previous years. Hongkong International Lighting Fair has been an ideal platform for LED...
In October 5th-7th 2016, New Delhi LED lighting exhibition held in New Delhi, the capital of India. As one of India’s largest LED lighting exhibition, New...
Lisun will come with professional technical team to attend 2016 Germany Frankfurt Lighting Fair( Light + Building) dated on 13th Mach ~18th March, 2016. This time...
The 2015 New Delhi Autumn LED Expo was successfully held during 3th December~5th December. As one of India biggest exhibition, this exhibition main relate different lighting...
It is the second time we have attended the fair, and it is a successful and wonderful fair. Lisun’s booth attracks numerous people’s visit.
During the exhibition, Lisun showed its main instruments which attracted many customers to stop and talk. Among them, there are not only many old customers hope...
USA Environmental Protection Agency(EPA) and Department of Energy(DOE) successively released Energy Star and Lighting Facts Standards for LED Luminaires/Bulb from 2010, which makes relevant industry persons...
As in previous year, Lisun and its instruments appeared at booth ED-A01 of Hong Kong International Lighting Fair (Autumn Edition) during 27th October to 30th October....
OLED (Organic Light Emitting Display) is a new generation of flat panel display technology after LCD, LED, CRT and PDP (Plasma Display Panel). It has significant new...
LED is not only a semiconductor device, but also a light source. It has the advantage such as high light output, low consumption and easily drove....
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
