IEC 60245-1: 2003 Rubber insulated cables -Rated voltages up to and including 450/750V- Part 1:General requirements

IEC 60245-1:2003 specifies general requirements for rubber-insulated cables rated up to 450/750 V. It covers construction, materials, and performance criteria to ensure safety, durability, and reliability in electrical installations and applications.

LISUN supplies the fully test solutions for the following IEC 60245-1:2003 , please see the below excel table:

IEC 60245-1:2003 Clause and Subject	LISUN Model
Table 1 – Requirements for non-electrical tests for cross-linked rubber insulation
1.1.1.2 Tensile strength and elongation at break	PULL-2000KG
1.4 Properties after ageing in an air bomb	LS-B48
2 Hot set test	GW-500
3 Pressure test at high temperature	GNGPL-3610-2PA
4 Ozone resistance	OTC-150A
Table 2- Requirements for non-electrical tests for cross-linked rubber sheath
1.1.1.2 Tensile strength and elongation at break	PULL-2000KG
2 Hot set test	GW-500
4 Elongation test at low temperature	LS-B40
Table 3- Requirements for electrical tests for cross-linked rubber insulated cables
3 Measurement of insulation resistance at temperatures above 90℃	WB2681A
5.6.3.1 Flexing test for flexible cables	WDT-B42
5.6.3.2 Static flexibility test	WDT-3
5.6.3.3 Wear resistance test	WDT-B49
5.6.3.4 Tensile strength of central heart of lift cables	PULL-2000KG
5.6.3.5 Flame retardance test for lift cables	ZRS-3H

Tags：GNGPL-3610-2PA , GW-500 , LS-B40 , LS-B48 , OTC-150A , PULL-2000KG , WB2681A , WDT-3 , WDT-B42 , WDT-B49 , ZRS-3H