LISUN occupies almost 30% of the market in India lighting industry, many production, R&D and third-party laboratories use LISUN’s testing instruments. At the same time, we...
LISUN has been a member of the CIE International Commission on Illumination since 2003. We have actively participated in the drafting and formulation of CIE relevant...
LISUN has several senior engineers who are experts of the IEC International Electrotechnical Commission. They are responsible for the drafting and formulation of many of these...
IS 16102 (Part 2): 2026 specifies the performance requirements for self‑ballasted LED lamps used for general lighting services in India, complementing the safety provisions defined in...
The core of IEC 62504:2014 lies in its systematic compilation of precise definitions for LED-specific components and systems, addressing the terminology confusion caused by rapid technological...
This standard, “CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules and its supplement”, focuses on setting out measurement methods for electrical,...
This part of IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general...
The report CIE 121:1996 sets out to provide specifications for the standard conditions under which photometric tests should be carried out and to recommend testing procedures...
The IEC 62612:2013 standard specifies performance requirements for self-ballasted LED lamps intended for general lighting services, operating at supply voltages greater than 50 V. I
This European Standard EN 61547: 2009 has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and...
This standard EN 62717:2017 provides test methods related to parameters as prescribed by Commission Regulation (EC) 244/2009, Commission Regulation (EU) 1194/2012and Commission Regulation (EU) 874/2012 while...
This European Standard EN 13032-1: 2004 establishes general principles for the measurement of basic photometric data for lighting application purposes.
This Indian Standard IS 16107 (Part 2/Sec1) was adopted by the Bureau of Indian Standards, after the draft finalized by the Illumination Engineering and Luminaires Sectional...
This Indian Standard IS 16103 (Part 2) was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries...
This standard specifies the technical requirements for number plate lighting devices designed for use in automobiles, ensuring that the number plate remains visible under various driving...
This standard specifies the general requirements for elevated type aerodrome lighting fittings used in airports. It covers the design, manufacturing, and testing requirements to ensure safety,...
IS 16107-1 specifies the general performance requirements for luminaires. This standard is intended to ensure safety, functionality, and durability of various types of luminaires used in...
IS 16106: 2012 Standard was adopted by the Bureau of Indian Standards, after the draft finalized by the Electric Lamps and Their Auxiliaries Sectional Committee had...
This Indian Standard IS 16101: 2012 which is identical with IEC/TS 62504 : 2011 ‘General lighting – LEDs and LED modules — Terms and definitions’ issued...
This standard sets the energy efficiency, functionality, and labeling requirements for indirect and direct general light sources with a luminous flux between 60 lumens and 12,000...
SASO has set the enforcement date for compliance with SASO standard 2927 for street lighting (Part III) to be September 1, 2020. UL Lighting laboratories have...
SAE ARP4087DWing Inspection Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIBSE Lighting Guide LG2: Lighting for healthcare premises
BS EN 61747-6-2Liquid crystal display devices Part 6-2: Measuring methods for liquid crystal display modules — Reflective type need to use LISUN goniophotometer, integrating sphere and...
BS EN 12464-1Light and lighting. Lighting of work places Indoor work places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
BS IEC 62679-3-3Electronic paper displays – Part 3-3: Optical measuring methods for displays with integrated lighting units need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
SAE ARP694DAerial Refueling Lights – Design Criteria need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP693ELanding and Taxiing Lights – Design Criteria for Installation need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.19UNIFORM PROVISIONS CONCERNING THE APPROVAL OF POWER-DRIVEN VEHICLE FRONT FOG LAMPS need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.38UNIFORM PROVISIONS CONCERNING THE APPROVAL OF REAR FOG LAMPS FOR POWER-DRIVEN VEHICLES AND THEIR TRAILERS need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
ECE R.23UNIFORM PROVISIONS CONCERNING THE APPROVAL OF REVERSING LAM PS FOR POWER-DRIVEN VEHICLES AND THEIR TRAILERS need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 60601-2-41Medical electrical equipment – Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis need to use...
ICAO Annex 14 Volume I, Chapter 5 Chapter 6
FAA/AC 150/5345-43JSpecification for Obstruction Lighting Equipment need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.56UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOPEDS AND VEHICLES TREATED AS SUCH need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ECE R.4Uniform provisions concerning the approval of devices for the illumination of rear registration plates of power-driven vehicles and their trailers need to use LISUN goniophotometer,...
MIL-STD-3009LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
SAE ARP5825Design Requirements and Test Procedures for Dual Mode Exterior Lights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.50Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear- registration-plate illuminating devices for vehicles of category...
ECE R.82UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOPED HEADLAMPS EQUIPPED WITH FILAMENT HALOGEN LAMPS (HS2 LAMPS) need to use LISUN goniophotometer, integrating sphere and spectroradiometer system...
IEC 62341-6-1Organic light emitting diode (OLED) displays – Part 6-1: Measuring methods of optical and electro-optical parameters need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
FAA AC 150 5345-46DSPECIFICATION FOR RUNWAY AND TAXIWAY LIGHT FIXTURES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.6UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOPEDS EMITTING A DRIVING BEAM AND A PASSING BEAM need to use LISUN goniophotometer, integrating sphere and...
ECE R.87UNIFORM PROVISIONS CONCERNING THE APPROVAL OF DAYTIME RUNNING LAMPS FOR POWER-DRIVEN VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.65UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SPECIAL WARNING LAMPS FOR MOTOR VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ECE R.98UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EQUIPPED WITH GAS-DISCHARGE LIGHT SOURCES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ECE R.91Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ECE R.7Uniform provisions concerning the approval of front and rear position lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers...
ECE R.76UNIFORM PROVISIONS CONCERNING THE APPROVAL OF HEADLAMPS FOR MOPEDS EMITTING A DRIVING BEAM AND A PASSING BEAM need to use LISUN goniophotometer, integrating sphere and...
ECE R.77UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PARKING LAMPS FOR POWER-DRIVEN VEHICLES need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 61988-2-1Plasma display panels- Part 2-1: Measuring methods-Optical and optoelectrical need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-1Display lighting unit – Part 2-1: Electro-optical measuring methods of LED backlight unit need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 61747-30-1Liquid crystal display devices- Part 30-1: Measuring methods for liquid crystal display modules – Transmissive type need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
SASO 2902Energy Efficiency, Functionality and Labelling Requirements for Lighting Products Part 2 need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ISO 8995 CIE S 008Lighting of Indoor Work Places need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62679-3-2Electronic paper display – Part 3-2: Measuring method-Electro-optical need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-3Display lighting unit- Part 2-3: Electro-optical measuring methods for LED frontlight unit need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
IEC 62595-2-5Display lighting unit- Part 2-5: Measurement method for optical quantities of non-planar light sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES RP-29: Recommended Practice: Lighting for Hospitals and Health Care Facilities need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-75-19 Approved method: guide to goniometer measurements and types, and photometric coordinate systems need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-31-20 Photometric Testing for Roadway and Area Lighting Luminaires Using Incandescent or High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ANSI/IES LM-73-18 Photometric Testing of Entertainment Lighting Luminaires Using Incandescent Filament Lamps or High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer...
ANSI/IES LM-72-20 Directional Positioning of Photometric Data need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-66-20 Electrical and Photometric Measurements of Single-Based Fluorescent Lamp need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-10-20 Photometric Testing of Roadway and Area Lighting Fluorescent Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-35-20 Photometric Testing of Floodlights Using High Intensity Discharge or Incandescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-20-20 Photometry of Reflector Type Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-37-20 Guide for Determination of Average Luminance (Calculated) for Indoor Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-41-20 Photometric Testing of Indoor Fluorescent Luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-45-20 Electrical and Photometric Measurements of General Service Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 70-1987 The Measurment of Absolute Luminous Intensity Distributions need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-46-20 Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to...
ANSI/IES LM-51-20 Electrical and Photometric Measurement of High Intensity Discharge Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-11-20 Photometric Measurement of Searchlights Using Incandescent or HID Sources need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-79-19 Electrical and Photometric Measurements of Solid-state Lighting Products need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 094-1993 Guide for floodlighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 088:2004 Guide for the lighting of road tunnels and underpasses, 2nd ed need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 084-1989 Measurement of luminous flux need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 070-1987 The measurement of absolute luminous intensity distributions need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 043-1979 Photometry of floodlights need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-92-22 Optical and Electrical Measurement of Ultraviolet LEDs need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
ANSI/IES LM-9-20 Electrical and Photometric Measurement of Fluorescent Lamps need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 102-1993 CIE recommended file format for electronic transfer of luminaire photometric data need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 115:2010 Lighting of Roads for Motor and Pedestrian Traffic need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 117-1995 Discomfort glare in interior lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 121-1996 The photometry and goniophotometry of luminaries need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 136-2000 Guide to the lighting of urban areas need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 180:2007 Road Transport Lighting for Developing Countries need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 190-2010 Calculation and presentation of unified glare rating tables for indoor lighting luminaires need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
CIE 194:2011 On Site Measurement of the Photometric Properties of Road and Tunnel Lighting need to use LISUN goniophotometer, integrating sphere and spectroradiometer system to test
LEDs and Luminaire Test Solutions
LM-79 and LM-80 Test Solutions
LED Driver Test Solutions
Household Appliances Test Solutions
Mobile and Network Test Solutions
Automotive Electronics Test Solutions
Audio-Video and IT Test Solutions
Cable and Wire Test Solutions
Plugs and Sockets Test Solutions
Power Switch Test Solutions
Transformer Test Solutions
Electric Toys Test Solutions
Energy Meter Test Solutions
Motor-Operated Tool Test Solutions
English
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
