English

中文简体

English

Home Standards ANSI C 136.10-2006 American National Standard for Roadway and Area Lighting Equipment—Locking-Type Photocontrol Devices and Mating Receptacles

ANSI C 136.10-2006 American National Standard for Roadway and Area Lighting Equipment—Locking-Type Photocontrol Devices and Mating Receptacles

ANSI C 136.10-2006 is an American National Standard specifically formulated for locking-type photocontrol devices and their mating receptacles used in roadway and area lighting equipment. It establishes unified requirements for the physical compatibility (such as structural fit and connection stability) and electrical compatibility (including voltage tolerance, current carrying capacity, and signal transmission reliability) of these components. Additionally, the standard specifies corresponding test methods to verify whether the products meet the safety and performance criteria, ensuring that the locking-type photocontrol devices and mating receptacles can operate stably, safely, and reliably in outdoor lighting scenarios, thereby supporting the normal operation of roadway and area lighting systems.

Targeting locking-type photocontrol devices and mating receptacles in roadway and area lighting, ANSI C 136.10-2006 serves as a key American National Standard governing their design, production, and testing. It defines critical specifications for the components’ physical structure (e.g., locking mechanism design and dimensional compatibility) and electrical performance (such as insulation resistance and contact conductivity), while outlining rigorous test procedures to assess compliance. By adhering to this standard, manufacturers ensure that the photocontrol devices and receptacles exhibit strong compatibility, durability, and safety, enabling them to withstand outdoor environmental conditions and meet the operational demands of roadway and area lighting systems in the U.S. market.

LISUN supplies the fully test solutions for the following ANSI C 136.10-2006, please see the below excel table:

ANSI C 136.10-2006 Clause and Subject	LISUN MODEL
5.3 Receptacle heat-cycle test	GDJS-015B
6 Environmental requirements
11.2 Humidity test
7.2 Dielectric withstand	LS9956
7.3 Surges	SG61000-5
11.4 9 Surge test	SG61000-5
8.2 Low temperature impact	LS-B33
8.4 Temperature rise	WS-1
8.5 Flammability	HVR-LS
10.2 Light levels	LMS-6000
11.3 Rain test	JL-X