ISO 6722-1:2011 Road vehicles -60 V and 600 V single- core cables – Part 1:Dimensions, test methods and requirements for copper conductor cables

ISO 6722-1:2011 specifies the dimensions, general test methods and performance requirements for single-core copper conductor cables with rated voltages of 60 V and 600 V used in road vehicles. It establishes uniform technical specifications covering conductor construction, insulation properties, marking and general quality criteria to ensure consistent product design and manufacturing across the automotive industry.

This standard defines a series of key performance tests, including mechanical impact, abrasion resistance, temperature resistance and environmental durability, to verify that automotive cables can operate safely and reliably under harsh vehicle operating conditions. It serves as a fundamental international reference for cable production, quality inspection, type approval and engineering application in the automotive electrical system sector.

LISUN supplies the fully test solutions for the following ISO 6722-1:2011, please see the below excel table:

GNGPL-3610-2PA IEC 60884-1 Clause 30.1 Figure 41 | IEC 60811-3-1 Clause 8 | High Temperature Pressure Test Device

LS-B39 IEC 60811-1-4 Clause 8.1 and 8.2 Low Temperature Winding Test Device

DWC-1 IEC 60884-1 Clause 24.5 Figure 30, IEC 61386-1, IEC 60811-506 Low-Temperature Impact Test Device

GDJS-015B Temperature Humidity Chamber | Thermal Chamber

OTC-150A Ozone Aging Test Chamber