English

中文简体

English

Home Standards IEC 60745-2-1 Hand-held motor-operated electric tools-Safety-Part 2-1:Particular requirements for drills and impact drills

IEC 60745-2-1 Hand-held motor-operated electric tools-Safety-Part 2-1:Particular requirements for drills and impact drills

Scope

This clause of Part 1 is applicable, except as follows:

Addition:
This standard applies to drills and impact drills.

Normative references

This clause of Part 1 is applicable.
3 Definitions
This clause of Part 1 is applicable, except as follows:

Additional definitions:

drill:
tool specifically designed to bore holes in various materials such as metal, plastics, wood, etc.

impact drill: drill specifically designed to bore holes in concrete, stone and other materials. It is similar, in appearance and construction, to a drill, but has a built-in percussion system which gives an axial percussion movement to rotating output spindle. It may have a device for rendering the percussion system inoperative, so that it may be used as a conventional drill.

General requirements

This clause of Part 1 is applicable.

General conditions for the tests
This clause of Part 1 is applicable, except as follows:

Addition:
For drills which have both a mechanical means of setting different ranges of speed and an electronic means of setting the speed within a given range, the mechanical device is adjusted to the lowest range possible and the electronic device is adjusted to the highest setting within the given range.

LISUN following instruments fully meet IEC 60745-2-1 Hand-held motor-operated electric tools-Safety-Part 2-1:Particular requirements for drills and impact drills