What should I do if there is leakage during the use of a High and Low Temperature Thermal Shock Chamber?

Name: High and Low Temperature Thermal Shock Chamber
Brand: LISUN
SKU: HLST-500D
Price: 42000 USD
Availability: InStock

Question

Accepted Answer

1. The lighting power supply is only for maintenance personnel to use and is for safe voltage.
2. Ventilation holes should not be placed in the high-pressure part of the High and Low Temperature Thermal Shock Chamber. If the customer insists on installing ventilation holes, the aperture should be small to avoid the risk of electric shock if fingers or measuring probes are accidentally inserted.3. Special tools with good insulation performance should be used for operating tools near high voltage areas. For adjustment points of accessories in high voltage or high temperature areas and difficult to find adjustment points, a screwdriver (screwdriver) should be placed to guide the setting. The screwdriver handle should have good insulation performance and be placed in a place that is not easy to hinder work or cause danger.4. When the main switch of the power supply in the High and Low Temperature Thermal Shock Chamber displays (off) status, all power sources entering the interior must be cut off except for the power input line. The power circuit needs to be equipped with fuses at the input and output terminals, and if necessary, with automatic fault alarm devices.5. When designing equipment, it is necessary to consider setting the devices and live wires that are still live within the range that technicians and maintenance personnel cannot (accidentally) touch after the equipment is shut down.
6. Where operations need to be stopped, signal devices such as “Do Not Hands” signs, warning lights, and alarms should be installed.

LISUN Model	HLST-100D-*	HLST-250D-*	HLST-500D-*	HLST-100T-*	HLST-250T-*	HLST-500T-*
Chamber Structure	Two-chamber Type			Three-chamber Type
Working room size(mm)	450450500	600600600	800800800	450450500	600600600	800800800
Basket Size	250250250	400400450	600600600	/	/	/
Testing Sample rack	One layer	One layer	One layer	Two Layers	Two layers	Two layers
Temperature range A：-20℃~150℃
Power	About 15KW	About 25KW	About 38KW	About 20KW	About 30KW	About 40KW
Cooling method	Wind cooling	Wind cooling	Wind cooling	Wind cooling	Water cooling	Water cooling
Temperature range B：-40℃~150℃
Power	About 22KW	About 32KW	About 45KW	About 28KW	About 38KW	About 45KW
Cooling method	Wind cooling	Wind cooling	Wind cooling	Wind cooling	Water cooling	Water cooling
Temperature range C：-50℃~150℃
Power	About 32KW	About 43KW	About 48KW	About 35KW	About 43KW	About 48KW
Cooling method	Wind cooling	Wind cooling	Water cooling	Wind cooling	Water cooling	Water cooling
High and low temperature conversion time	≤10S
Temperature recovery time	≤5min
Temperature volatility	≤±0.5℃
Temperature deviation	±2℃
Temperature uniformity	≤2℃
Temperature resolution	Temperature: 1 ℃; time: 0.1min
Working power	3-phase 5-wire AC380V/50Hz (60Hz available)
Working temperature	5℃~30℃；≤85％R.H

Goniophotometer Test System

Popular Solutions

Global

European Union

North America

Other regions

High and Low Temperature Thermal Shock Chamber

Leave a Message

Related Products

Product Categories

Related Applications

Related Standards

Related Technical Articles