Product No: HM-120
Haze Meter – Turbidity Meter HM-120 conforms to both ASTM and ISO international standards ASTMD1003/D1044, ISO13468/ISO14782, JISK7105, JISK7361, JISK7136 and GB/T2410-08. HM-120 does not need to be preheated, it can be used and tested immediately, and the results are available in 1.5 seconds to meet the haze and total transmittance measurement characteristics under three standard lighting sources: CIE-A, CIE-C, and CIE-D65. The open measurement area can be tested vertically or horizontally. It is widely used in transmittance and haze detection in glass processing, plastic processing, film, display processing, packaging industry and other industries.
Specification:
| LISUN Model | HM-100 | HM-120 |
| Light Source | CIE-A, CIE-C | CIE-A, CIE-C, CIE-D65 |
| Standards | ASTMD1003/D1044, JISK7105, JISK7361, JISK7136, GB/T2410-08 |
ASTMD1003/D1044, ISO13468/ISO14782, JISK7105, JISK7361, JISK7136, GB/T2410-08 |
| Test Parameter | ASTM (HAZE), Transmittance (T) | ASTM and ISO (HAZE), Transmittance (T) |
| Test Aperture | 21mm | 21mm,7mm |
| Instrument Screen | 5-inch TFT LCD screen | 7-inch touch screen, Android system |
| Measuring Range | 0-100% | |
| Transmittance Repeatability | ≤0.1% | ≤0.05% |
| Haze Resolution | 0.01% | |
| Transmittance Resolution | 0.01% | |
| Optical Path Structure | Transmission: 0/D (parallel light illumination, diffuse reflection reception) | |
| Integrating Sphere Size | Φ154mm | |
| Light Source | 400~700nm full spectrum LED light source | |
| Sample Size | Open space, no size limit | |
| Data Storage | 10,000 values | Massive Storage |
| Interface | USB | |
| Power Supply | DC12V/3A | |
| Working Temperature | 5~40℃, relative humidity 80% or lower (at 35℃), no condensation | |
| Size | 310mm*215mm*540mm | |
Standard:
ASTM D1003 “Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics”
ASTM D1044 “Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser”
ISO 13468 “Plastics — Determination of the total luminous transmittance of transparent materials”
ISO 14782 “Plastics — Determination of haze for transparent materials”
JISK7105, JISK7361, JISK7136, GB/T2410-08
Application:
Plastic sheet, film, glass, screen, liquid etc.

LISUN supply the test instruments and solutions for Automotive Electronics. The test solutions...
Transparency is one of the important indicators to evaluate the optical properties of transparent...
Haze meter, also known as turbidity meter: Haze indicates the degree to which transparent or semi...
Water is an important resource that not only aids in the upkeep of human health but also makes a...
The density and visibility of fog are related, and a haze meter can be used to understand this...
Haze/Turbidity measurements are two highly helpful instruments that may be used in a broad variety...
Techniques for measuring haze and turbidity are necessary in a wide variety of businesses, such as...
Both haze and turbidity are examples of optical phenomena that are caused by the scattering of...
Quantifying haze and turbidity is becoming more required in a wide range of industries, including...
Haze meters is also known as turbidity meters, indicates the degree to which transparent or...
Introduction Haze and turbidity are critical parameters in evaluating the optical clarity and...