Introduction: The use of electrostatic discharge or ESD guns has become standard practice for testing the reliability of electronic components and systems against ESD attacks. New developments and trends in the area of electrostatic discharge (ESD) testing are influencing the evolution of ESD guns. Exciting new innovations and trends in electrostatic discharge (ESD) guns are discussed, along with ...
The scientific name of dustproof test chamber is sand and dust test chamber, which is widely used, including but not limited to the protection level test of various products such as electronic and electrical products, LED lighting fixtures, diving field, automobiles and automobile accessories. The dustproof test chamber is a device used to test the influence and reliability of external environment...
In our lives, powerful currents are generated due to lightning strikes or sudden closing of large power station switches, which can cause great damage to our electrical equipment. Therefore, we usually use surge immunity to simulate such situations and carry out tests to protect electrical equipment as much as possible. LISUN SG61000-5 surge generator provides a common basis for evaluating the re...
Introduction: Analysis of electromagnetic interference (EMI) is essential for assuring the EMC of electronic equipment and systems. Modern EMI test receivers use complex signal processing methods to improve the reliability and speed of EMI analysis, thanks to technological advancements. In this piece, we’ll go into the different signal processing methods used in tandem with test receivers fo...
An optical integrating sphere is an indicative, spherical structure apparatus for measuring light, also known as an integrating sphere, omnidirectional reflectance sphere, or illuminance detector. This article will outline the structure, principle, use and some common practices of photometric integrating spheres. An optical integrating sphere has a spherical shape and is comprised of optical mater...
Introduction A crucial part of fire risk assessment is glow wire testing, which is a useful method for analyzing the fire behavior and safety capabilities of materials used in many sectors. The purpose of this article is to draw attention to the value of glow wire testing in the evaluation of fire risks as well as its contribution to the safety of electrical and electronic goods. We can comprehend...
Temperature in the UV Aging Test Chamber: the temperature in the chamber shall be controlled according to the specified test procedure when the equipment is in the irradiation stage or in the lighting stop stage, and the relevant specifications shall specify the temperature to be reached at the irradiation stage of 40 ℃ or 55 ℃ according to the intended use of the equipment or components; Air ...
I. The Structure and Basic Principle of Optical Integrated Sphere The basic principle of an optical integrated sphere is to have a light source at the center of the sphere which emits light which is then diffused onto the coating on the inner walls of the sphere. The diffused light passes through diffusion and continues to cycle until the light flux is the same across the entire inner surface of t...
Ozone Aging Test Chamber can be used for rubber products, such as vulcanized rubber, thermoplastic rubber, cable insulation sheath and other products under static tensile deformation, exposed to airtight and lightless air with constant ozone concentration and a constant temperature test chamber, to test the sample according to the predetermined time, and to evaluate the ozone aging resistance of r...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語