Temperature in the UV Aging Test Chamber: the temperature in the chamber shall be controlled according to the specified test procedure when the equipment is in the irradiation stage or in the lighting stop stage, and the relevant specifications shall specify the temperature to be reached at the irradiation stage of 40 ℃ or 55 ℃ according to the intended use of the equipment or components; Air ...
I. The Structure and Basic Principle of Optical Integrated Sphere The basic principle of an optical integrated sphere is to have a light source at the center of the sphere which emits light which is then diffused onto the coating on the inner walls of the sphere. The diffused light passes through diffusion and continues to cycle until the light flux is the same across the entire inner surface of t...
Ozone Aging Test Chamber can be used for rubber products, such as vulcanized rubber, thermoplastic rubber, cable insulation sheath and other products under static tensile deformation, exposed to airtight and lightless air with constant ozone concentration and a constant temperature test chamber, to test the sample according to the predetermined time, and to evaluate the ozone aging resistance of r...
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires’ photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI-C78.377 and ...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials, components and electronic components. It adopts advanced control technology, which can automatically control parameters such as temperature, humidity and salt fog concentration, and start and stop the test, and is easy...
The Rapid temperature change test chamber is applicable to the detection of various performance indicators of aerospace products, information electronics, instruments and meters, materials, electricians, electronic products and various electronic components under the condition of rapid temperature change. Rapid temperature chamge test chamber: It is mainly used to conduct environmental simulation ...
I. Surge Test Equipment Standard The national standard for surge voltage tester is GB/T17626.5 (equivalent to the International Standard IEC61000-4-5). The standard mainly simulates various cases due to indirect lightning strikes, such as: (1) lightning strikes on external wires, resulting in a large current flowing into the external wires or ground resistance, thus generating interference voltage...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real environment, helping people to verify products with high performance, safety and durability. GDJS-015B Temperature Humidity Chamber | Thermal Chamber The control system is the heart of the whole equipment, w...
Introduction As we move towards a more sustainable future, lighting designers are more concerned with developing ecologically friendly and low-energy lighting options. Sustainable lighting design relies heavily on goniophotometry, a precise measuring method for assessing the angular distribution of light. Focusing on its effect on energy efficiency, light pollution reduction, and human-centered li...