UL 1278 STANDARD FOR SAFETY Movable and Wall-or Ceiling-Hung Electric Room Heaters

LOCATION-DEDICATED HEATER – A cord-connected heater that is normally placed in one location for usage such as:
a) Cord-connected wall- or ceiling-mounted heater
b) Freestanding cord-connected heater that exceeds the weight and/or dimension limitations of a movable heater.

LOW-VOLTAGE (SECONDARY) CIRCUIT – A circuit involving a potential of not more than 30 volts altermating-current, (42.4 volt peak or direct-current). and supplied by a primary battery or by a standard Class 2 transformer, or by a combination of transformer and fixed impedance that, as a unit, complies with all the performance requirements for a Class 2 transformer. A circuit derived from a source of supply clasifed as a line voltage circuit, using resistance in series with the supply dircuit as a means of limiting
the voltogc and ourrent, io not concidered to bo a low woltoge nor an isolatod limitod goondary oirouit.

MOVABLE HEATER – A freestanding cord and plug connected heater that does not exceed 65 pounds (29.4 kg) and has no dimension greater than 8 feet (2.4 m). A wall- or ceiling-hung heater which may be used as a movable heater without further guiding or propping, is also considered a movable heater.

PRODUCT ENCLOSURES – Thal part of the product (metallic or nonmtallic) that;
a) Renders inaccessible all or any parts of the equipment that may otherwise present a risk of
electric shock, injury to persons, and
b) Retards propagation of flame initiated by electrical disturbances ocurring within.

LISUN following instruments fully meet UL 1278 STANDARD FOR SAFETY Movable and Wall-or Ceiling-Hung Electric Room Heaters

Tags：Heaters , Movable , Test Finger , Test Pin , Test Probe , UL 1278