Sales@Lisungroup.com +8618117273997

English

中文简体

English

Русский

Español

Português

Türkçe

العربية

Deutsch

Polski

Italiano

Français

한국어

ไทย

Tiếng Việt

日本語

Home Products Multiway Life Tester

REQUEST A QUOTE

Multiway Life Tester

Product No: CH316

Specifications
Downloads
Applications
Standards
Installations

CH316 Multiway Life Tester | Multi-Channel Luminaire Switch Life Tester is specifically designed for durability testing of on/off switches in lighting products. The system supports 16 independent, simultaneous test channels, with each channel operating autonomously – ensuring no interference between them – while tracking the number of on/off cycles for each individual sample in real time. Samples can be added or replaced at any point during the test process without interrupting the overall operation. This equipment is widely used by quality control departments in lighting manufacturing firms and by third-party testing laboratories to evaluate the durability and reliability of switches in light sources and luminaires.

Standards:

Standards No.	Standards Name
IEC 60598-1:2024	Luminaires – Part 1: General requirements and tests
IEC 60432‑1:2005	Incandescent lamps‑Part 1:Tungsten filament lamps for domestic and similar general lighting purposes
GB/T 7000.1-2023	灯具第 1 部分：一般要求与试验
GB/T 33721-2026	LED 灯具可靠性试验方法

Specifications:

Items	Specifications
Number of Simultaneous Test Channels	16 channels, with independent counting for each channel
Normal Load Current Range	30mA~1,000mA (RMS)
Maximum Number of Test Cycles	0~1,000,000 times
Setting Range for on/off Durations	Adjustable from 1 second to 99 hours, 59 minutes, and 59 seconds, with a minimum increment of 1 second.
Data Storage Functionality	Test data is automatically saved in the event of a power failure; testing resumes from the point of interruption once power is restored.
Expiration Reminder	Audible and visual alarms for sample failure; a fault in one channel does not affect the operation of the remaining channels.
Sample Handling	Test samples can be added or replaced at any time during the test process.
View Data	The current cycle life count for each sample can be read at any time.

Tags：CH316

Standards

IEC60432-1 2005 Standard Free Download
Fluorescent Lamp Test Solutions

For the Fluorescent Lamp design and manufactory, LISUN can supply a full quality control test...
IEC 62612:2018 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements

The IEC 62612:2013 standard specifies performance requirements for self-ballasted LED lamps intended for general lighting services, operating at supply voltages greater than 50 V. I
Austrilia and Indonesia – Installed goniophotometer, integrating sphere, surge generator and electrical safety test
05 Apr, 2016
Our engineer went to Austrilia and Indonisia to install instruments and train them this July. The customer from...