Sales@Lisungroup.com +8618117273997

English

中文简体

English

Русский

Español

Português

Türkçe

العربية

Deutsch

Polski

Italiano

Français

한국어

ไทย

Tiếng Việt

日本語

Home Products RF Radiated Immunity Test System

REQUEST A QUOTE

RF Radiated Immunity Test System

Product No: RFRI61000-3

Specifications
Downloads

RFRI61000-3 RF Radiated Immunity Test System fully complies with the IEC 61000-4-3 standard and is designed to evaluate the immunity of various electrical and electronic devices to radiated RF electromagnetic fields. Comprising modules such as an RF signal generator, power amplifier, transmitting antenna, power meter, and test software, the system operates in conjunction with a 3-meter semi-anechoic chamber or a GTEM cell. It applies amplitude-modulated RF fields within specified frequency ranges to simulate radiated electromagnetic interference generated by sources such as radio stations, mobile communication systems, and industrial RF equipment.

RFRI61000-3 Radiated Susceptibility Test System is widely used for EMC pre-compliance and certification testing – covering products such as LED lighting, LED drivers, automotive electronics, industrial control equipment, and household appliances – the RFRI61000-3 system automates parameter setup, field strength calibration, interference application, and sample status monitoring. It ensures comprehensive data retention, meeting the traceability requirements for CNAS-accredited laboratories.

Standards:

Standards No.	Standars Name
IEC 61000-4-3:2020	Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency electromagnetic field immunity test
GB/T 17626.3-2023	电磁兼容试验和测量技术第 3 部分：射频电磁场辐射抗扰度试验
EN 61000-4-3:2020	Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency electromagnetic field immunity test
IEC 61000-6-1:2016	Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity standard for industrial environments
IEC 61347-1:2024	Controlgear for electric light sources – Safety – Part 1: General requirements
ISO 11452-2:2019	Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Absorber-lined shielded enclosure (ALSE)
GJB 151C-2024	军用设备和分系统电磁发射和敏感度要求与测量（RS103 电场辐射敏感度）
MIL-STD-461G	Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (RS103 Radiated Susceptibility)

Specifications:

LISUN Model	Product Name	Product Specifications
LS-SMB100B	RF Signal Generator	Frequency range 9kHz~6GHz, supports AM/FM/PM/pulse modulation
LS-GLJ06G	Power Meter	9kHz~6GHz (need 2 sets: Forward and Reverse Power Meter)
LS-PB60	Field Strength Probe & Monitor	1MHz~6GHz, 600V/m
LS-PA80M1G-300W	RF Power Amplifier	80MHz~1GHz, Rated output power ≥300W with alarm function, 5U chassis
LS-PA1G6G-100W	RF Power Amplifier	1GHz~6GHz, Rated output power ≥100W with alarm function, 4U chassis
LS-9128ESP	Stacked Log Periodic Antenna	Frequency: 30MHz~1GHz; maximum output power 3kW; input impedance 50Q;VSWR<1.5:1
LS-9120D	Double Ridged Broadband Horn Antenna	Frequency: 1GHz~8GHz, gain 6~17dBi, power 200W, standing wave ≤2.5
CASE-19	Cabinet	Install the above instruments in a cabinet for a neat and professional appearance, with easy and convenient operation.
LS-SOFT61000-3	Software	Design according to IEC/EN 61000-4-3 by LISUN
PC-3	Computer	ACER or similar brands computer with monitor, nstalled the English Windows OS
LS-SW03	RF Switch (Option)	Easy to switch between 2 or 3 sets of Power Amplifiers. 3 Channels. Connector: SMA. Impedance: 50 ohms. Frequency range: DC-6 GHz. Lifespan: 1,000,000 cycles