Product No: LIS-LSCS-1730
The LIS-LSCS-1730 Automotive Wire Harness Open‑Short Simulator is a dedicated simulation device for automotive electronic and electrical testing. It simulates standardized operating conditions such as open circuits, short circuits, power supply short circuits, ground short circuits, and connector interruptions on signal lines and load circuits, meeting the stringent testing requirements of GB national standards, ISO international standards, and major automakers for circuit reliability and protection performance. The device supports multi-channel independent or synchronous control, allowing for complete testing with a single wiring setup, significantly simplifying manual operation and improving testing efficiency and consistency.
The LIS-LSCS-1730 Automotive Wire Harness Open‑Short Simulator incorporates standard test procedures, supporting programmable settings for action time, number of cycles, and number of test steps. Combined with real-time voltage and current monitoring and automatic test report generation, it can be widely used in the R&D verification, certification testing, and production line quality control of electronic and electrical components in passenger cars and commercial vehicles, and is seamlessly compatible with various testing systems.
Standards:
| Standards No and Clause | Standards Name |
| ISO 16750-2:2023 Clause 4.9/4.10 | Road vehicles – Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads – Open circuit tests / Short circuit/overload protection |
| VW 80000:2021/2022 E‑17/E‑20 | Test specifications for electrical units in vehicles up to 3.5 t – Short circuit test for signal and load circuits / Reverse feed |
| JA 3700-MH-4-2021/2025 Clause 4.20 | 一汽集团乘用车电子电气零部件电气环境技术条件 短路试验 |
| QLP YSY 0231-2024 Clause 16.17 | 浙江零跑科技股份有限公司企业标准 信号线和负载电路短路保护测试 |
| QSK J07.362-2024 Clause 5.17/5.20 | 赛力斯电气、电子部件及子系统电气试验方法 连接器中断试验 / 信号电路和负载电路短路试验 |
| SMTC 3 800 001 Clause 5.16 | 上汽集团电子电器零部件通用测试要求 信号线与驱动电路的短路保护 |
| GB/T 45120-2024 Clause 10.15 | 道路车辆 48V 供电电压电气要求及试验 信号线和负载电路短路 |
| GB/T 28046.2-2011 Clause 4.9/4.10 | 道路车辆 电气及电子设备的环境条件和试验 第 2 部分:电气负荷 开路试验 / 短路保护 |
| VDS 28401-02 [4]:2025 Clause 6.1.5 | 东风日产一般 E&E 部品台上 EMC 测试标准 EQ/TE05 输入 / 输出端口对电源及地短路测试 |
Specifications:
| LISUN Model | LIS‑LSCS‑1730 | LIS‑LSCS‑1750 |
| Switch Channels | 30 channels | 50 channels |
| Max.Voltage | 60VDC/220VAC | |
| Max.Current | 10A per channel, maximum 50A for the whole unit | |
| On/off switch(S1) | <20mΩ/10A | |
| Short Circuit Switch(S2/S3) | <20mΩ/10A | |
| Power Switch(S4/S5) | <5mΩ/50A | |
| Open circuit/short Circuit Action Time | 20ms~10000s | |
| Loop Count | 1~10000 times | |
| Test Steps | 1~255 steps | |
| Communication Interface | LAN、USB、RS485 | |
| Functional Configuration | Full touchscreen, built-in standard library, voltage and current monitoring, automatic report generation | |
| Control System | 10.1-inch Chinese/English Android capacitive touchscreen display | |
| Usage Environment | Temperature 10~40℃,humdity 30%~70% | |
| Working Power Supply | 110~250VAC、50/60Hz | |
| Dimension | 460*180*550mm | |
| Weight | Around 8kg | |