Clip-Mounted Luminaries Test Device

The THJJ-1 Spring Clamping Test Device complies with IEC 60598-1:2008 Clause 4.14.1 Test E and GB7000.1-2007, and is used for tensile testing of lamps mounted with spring clamps.

Specifications
1. Aluminum alloy frame capable of holding 6 pieces of glass and clamping them in place.
2. 6 pieces of 10mm-thick glass, each measuring 300×300mm
. 3. 1 chrome-plated metal rod with a diameter of 20mm.
4. The force-application device can apply a corresponding tensile force of 20 N to the spring clip.

Test Procedure (According to IEC 60598-1:2008 Clause 4.14.1 Test E):

LED Luminaires and LED Power Driver Test Solution

Goniophotometer System: LSG-6000, LSG-1890B

Spectroradiometer & Integrating Sphere Test System: LPCE-2, LPCE-3

LED Life Maintains a Test System in Accordance with LM-80: LEDLM-80PL

Waterproof Test for IPX5 and IPX6 Rating Testing: JL-56

Dustproof Testing Machine for IP5X and IP6X Testing: SC-015

LED Power Driver Testers: WT2080 (for the lab) and ATE-2 (for the production line)

Electrical Safety Tester: LS9955

CFL and Electronic Ballast Test Solution

Goniophotometer System: LSG-1890B

Integrating Sphere and Spectrophotometer Test System: LPCE-2

Adjustable Reference Ballast: DYJ-50HZ, HCS-105A, and DYJ-HID

Electric Ballast Tester: WT5000 (for the lab) and ATE-1 (for the production line)

Digital Torsion Meter and Multiway Life Tester: CH338 and CH316

Electrical Safety Testers: LS9923, ZRS-3H, ZY-3

EMC and EMI Test Solutions for CFL and LED Luminaires

EMI Test System: EMI-9KB or EMI-9KA

Electrostatic Discharge Simulator: ESD61000-2

EFT Immunity Measurement: EFT61000-4

Surge Generator: SG61000-5

Voltage Dips and Interruptions Generator: CSS61000-11

Ring Wave Generator: RWG61000-12

www. Lisungroup.com

Patents Filed

All Rights Reserved by Lisun Group

Subject to Change Without Notice