Impulse Current Generator
User's Manual
Applicable LISUN models: SUGC-C15KV30KA
Open the generator’s accessory compartment and remove the router inside, as shown in the figure below: Connect the router to the instrument’s LAN port using an Ethernet cable.


After powering on the router and the generator, open the PAD included with the generator and connect to the corresponding WLAN name in the settings interface. This WLAN is broadcast by the instrument and is not connected to the Internet.
The username and password are the same.


WLAN Connection Diagram
Open the app, tap the test software app icon ③ (the operation indicator), and enter the parameter settings screen.



③ Operation Indicator ③ The operation indicator is shown in the figure above. You can then click to enter the test interface and set the voltage.

As shown in the figure below:

Click to set the voltage

Click to set the test time

Click to set the number of discharge cycles

Click the checkbox √ to automatically select positive or negative values.

Once you’ve completed the above settings, you can click to run a test.

LED Luminaires and LED Power Driver Test Solution
Goniophotometer System: LSG-5000, LSG-1800B, or LSG-1700B
Spectroradiometer & Integrating Sphere Test System: LPCE-2 or LPCE-3
LED Life Maintains a Test System in Accordance with LM-80: LEDLM-80PL
Waterproof Test for IPX5 and IPX6 Levels: JL-56
Dustproof Testing Machine for IP5X and IP6X Testing: SC-015
LED Power Driver Testers: WT2080 (for the lab) and ATE-2 (for the production line)
Electrical Safety Tester: LS9955
CFL and Electronic Ballast Test Solution
Goniophotometer System: LSG-1800B or LSG-1700B
Integrating Sphere and Spectrophotometer Test System: LPCE-2 or LPCE-3
Adjustable Reference Ballast: DYJ-50HZ, HCS-105A, and DYJ-HID
Electric Ballast Tester: WT5000 (for the lab) and ATE-1 (for the production line)
Digital Torsion Meter and Multiway Life Tester: CH338 and CH316
Electrical Safety Testers: LS9922I, ZRS-3H, ZY-3
EMC and EMI Test Solutions for CFL and LED Luminaires
EMI Test System: EMI-9KB or EMI-9KA
Electrostatic Discharge Simulator: ESD61000-2
EFT Immunity Measurement: EFT61000-4
Surge Generator: SG61000-5
Voltage Dips and Interruptions Generator: CSS61000-11
Ring Wave Generator: RWG61000-12

www. Lisungroup.com
Patents Filed
All Rights Reserved by Lisun Group
Subject to Change Without Notice

中文简体