CEI 23-50 V4 Figure 103a Gauge

This CEI 23-50 V4 Figure 103a Gauge is designed in compliance with CEI 23-50:2007 Standard, specifically as an additional component following Figure 101 of the standard (alongside other supplementary figures). It features a front profile height of 10 mm and is engineered for specialized thermal testing purposes, ensuring precision and reliability in evaluating the performance of plugs and sockets. Crafted with strict attention to dimensional accuracy, it meets the rigorous requirements of relevant testing protocols to support quality assurance in electrical component manufacturing.

Specifications:
• Front profile height: 10 mm
• Dimension with tolerance: 50 +0.5
• Dimension with tolerance: 28 +0.5

Test Procedures:
• Ensure the test environment meets the standard operating conditions required by CEI 23-50:2007.
• Position the gauge correctly in alignment with the plug or socket under test, ensuring full contact with the relevant surfaces as specified.
• Initiate the thermal testing process as outlined in section 19.102 of the CEI 23-50:2007 Standard.
• Monitor and record the thermal performance data of the tested component throughout the duration of the test.
• Verify that the gauge maintains its dimensional stability and positional accuracy during the entire testing cycle.
• Conclude the test once the specified duration or performance criteria in the standard are met, and document the results for compliance evaluation.

Applications:
• Thermal testing of plugs and sockets in accordance with CEI 23-50:2007 Standard requirements.
• Quality control and compliance verification for electrical component manufacturers producing plugs and sockets.
• Performance evaluation in laboratory settings to ensure electrical devices meet safety and thermal resistance standards.
• Calibration support for testing equipment used in the production and inspection of plugs and sockets.
• Regulatory compliance testing for products intended to enter markets adhering to CEI 23-50 specifications.

CEI 23-50 V4 Figure 103a Gauge