+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語
03 Jan, 2017 3195 Views Author: root

IEC60598 General Requirements and Testing

With the fast development of electrical industry in China, manufacturing enterprises scale grows constantly, international electric safety standards apply more and more widely. Lighting industry standards are also widely used.

International standard IEC60598 general requirements and test cover classification of luminaries according to degree of protection against ingress of dust, solid objects and moisture, marking, mechanical construction and electrical construction. International Standard IEC 60598 specifies general requirements for luminaries for luminaries, incorporating electric light sources for operation from supply voltages up to 1000V such as Tungsten Lamp, Fluorescent Lamp and other Discharge Lamps. This part 1 covers all aspects of safety (electrical, thermal and mechanical).

Luminaries shall be so designed and constructed that in normal use they safely and cause no electrical shock or other danger such as fire disaster to persons or surroundings.

Prevent electrical shock test project:
Insulation Resistance and Electric Strength Test, measures the insulation resistance between charged body and accessible parts and leakage current under high voltage. Lisun LS9955 Automatic Electrical Safety Test System can test AC withstanding voltage, insulation resistance, leakage current and ground resistance and power.

LS9955_Automatic Safety Test System

LS9955_Automatic Safety Test System

Resistance to Dust, Solid Objects and Moisture
Luminaries IP ingress, indoor generally design to IP20, resistance to 12mm solid objects, non resistance to water; outdoor generally design to IP44, resistance to 1mm solid object, all-round splash water. Iron, Copper, Aluminum or alloy should be dustproof, except that it will not cause leakage or overheat etc unsafe factors. Lisun JL-X waterproof test system can test IPX1~IPX8 grade. SC-015 sand and dust chamber is applied in LED or other luminaries for IP5X and IP6X test.

 

JL-X waterproof test machine

JL-X waterproof test machine

SC 015_Dustproof Testing Machine

SC 015_Dustproof Testing Machine

Standard specifies that luminaries should have sufficient mechanical strength; its structure should keep the luminaries safe after suffering severe operation under normal usage. Compliance is checked by the impact of the sample, impact test uses spring impact hammer IK level tester according to IEC60068-2-75. Lisun IK Level Testers fully meets standard IEC60068-2-75. Rough service luminaries shall have adequate resistance to vibrations, which can use Lisun LVD-100KG Electrodynamic Vibration Generator Systemto do the test.

Electrodynamic Vibration Generator System

LVD-100KG-6D Electrodynamic Vibration Generator System

Measure Creepage Distances and Clearances
The standard specifies requirements and tests relating to the resistance to heat, fire and tracking of certain parts of insulating material of luminaries.

Ball pressure test shall be made in a heating cabinet having a temperature 25 °C ± 5 °C in excess of the operating temperature of the relevant part determined during the temperature test (normal operation), with a minimum temperature of 125 °C when parts retaining current carrying parts or SELV parts in position are tested, and 75 °C for other parts.

Needle Flame Test
Parts of insulating material retaining current-carrying parts in position shall withstand the following tests:
The parts to be tested are subjected to the needle-flame test of IEC 60695-2-2, the test flame being applied to the sample for 10 s at the point where the highest temperatures are likely to occur, measured if necessary during the thermal tests. The duration of burning shall not exceed 30 s after removal of the test flame, and any burning drop from the sample shall not ignite the underlying parts or tissue paper

ZY-3 Needle Flame Test

ZY-3 Needle Flame Test

Glow-wire test
Parts are subjected to a test using a nickel-chromium glow-wire heated to 650 °C. Any flame or glowing of the sample shall extinguish within 30 s of withdrawing the glow-wire, and any burning or molten drop shall not ignite a single layer of tissue paper, spread out horizontally 200 mm ± 5 mm below the sample

ZRS-3H Glow-wire Test Apparatus

ZRS-3H Glow-wire Test Apparatus

Tracking Test
Insulating parts of luminaries, other than ordinary luminaries, which retain current-carrying parts or SELV parts in position or are in contact with such parts, shall be of material resistant to tracking unless they are protected against dust and moisture. Lisun TTC-1 Tracking Test Chamber is for luminaries tracking test.

IEC60598 General Requirements and Testing

TTC-1 Tracking Test Chamber

Additionally, IEC 60598 standard expands the requirements of photobiological safety test, it is about UV radiation. Luminaires, intended for use with metal halide lamps for which protective measures regarding emitted UV radiation are required, shall be fitted with an adequate protective shield. Lisun EN62471-C LED Radiation Safety Test System is according to IEC60598 Annex P, this system is specifically for determining the risk in optical radiation.

IEC60598 General Requirements and Testing

EN62471-C Optical Radiation Safety Test System

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Surge Generator, EMC Test SystemsESD Simulator, EMI Test Receiver, Electrical Safety Tester, Integrating Sphere, Temperature Chamber, Salt Spray Test, Environmental Test ChamberLED Test Instruments, CFL Test Instruments, Spectroradiometer, Waterproof Test Equipment, Plug and Switch Testing, AC and DC Power Supply.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp: +8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp: +8618917996096

Tags: , , , , , , , , ,

Leave a Message

Your email address will not be published. Required fields are marked *

=