Specification: 
• Measure parameter:
1) Input: Vrms, Lrms, W, PF, Hz, Phasic angle, total harmonic and 0-39 component of harmonic.
2) Output: Lamp voltage, Lamp current, Filament current, Guided cathodic current, Lamp power, crest factor and oscillatory frequency, single high frequency analysis.
• Startup: Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time;
• Simultaneously display on 8 windows for input and output parameters, convenient for comparing and analysis;
• Test preheat energy, filament preheat time. And the parameters changes from 0 to 5s of filament voltage, filament current and filament power;
• Up to 1MHz lrms test content to every EB;
• Analysis symmetry of high Frequency curve of lout;
• 12-bit high-speed A/D, sampling rate up to 10MHz,can easily analysis signal curve of output;
• Finish a input and output testing at the same time within 1 minute;
• Portable, can test , display, print without computer, test report include data and curve, comply with international standard;
• Communication port for PC, run under Windows98 or Windows2000, English Version available.

Products of this category:
UI5000: This electronic ballast tester is updated version of UI3000. UI5000 ballast tester is with super-big LCD.
UI4000: Similar to UI5000. Contact us for more about how to test a ballast.
UI3000: This electronic ballast analyzer uses 12digit high-speed A/D converter to test ballast. The speed reaches 10MHz when sampling.
ATE-1: Test series connection, parallel connection and series/parallel connections of electronic ballast(about 15 kinds of connections), available for testing fluorescent ballast of various kinds.
UI2000-OK: Electronic Ballast Production Line Tester. With high speed when doing ballast testing.
UI2002A: Electronic Ballast High Frequency Parameters Tester. Testing a ballast with high frequency.
UI2002: Output Characteristic Analyzer of Electronic Ballast. Accuracy of this ballast test solution: class 2.
UI2002C: Fluorescent Lamp Asymmetric Pulse Tester. It's designed according to the latest update in IEC61347-2-3.
UI2001B: Integrated Function Tester for Inductance Ballast.
UI2000A-HID: HID Ballast Tester.
UI2000A-CCFL: CCFL Ballast Tester.
UI2000-ET: Electronic Transformer Tester. This transformer test equipment analyze both input and output characteristics, and can print without computer.
UI2001: Input Characteristic Analyzer of Electronic Ballast. Test fluorescent ballast input characteristics.
FD-1: Online OK Tester for Electronic Ballast and CFL. Suitable for mass testing in assembly line. Test 6 pieces at one time when testing ballast.